User's Manual

PlugLAN 8660 Smar

Bridge AV Ethernet Adapter User’s Guide

Table 2-4: Bandwidth Control Page

Field

Description

Downlink Bandwidth Control Select the download speed that the PlugLAN

8660 SmartBridge will use. Supported

downlink speeds are:

• Full Speed (default)

• 64k bps

• 128k bps

• 256k bps

• 512k bps

• 1M bps

• 4M bps

• 10M bps

Uplink Bandwidth Control Select the upload speed that the PlugLAN

8660 SmartBridge will use. Supported uplink

speeds are:

• Full Speed (default)

• 64k bps

• 128k bps

• 256k bps

• 512k bps

• 1M bps

• 4M bps

• 10M bps

Apply Button After you enter your configuration settings,

click this button to apply the settings.

Configuring SNMP Settings

The SNMP Configuration page lets you set the configure the SNMP settings for

your PlugLAN 8660 SmartBridge AV Ethernet Adapter. SNMP is an

application-layer protocol that provides a message format for

communication between SNMP managers and agents. SNMP provides a

standardized framework and a common language used for the monitoring

and management of devices in a network. For more information, refer to

the documentation that came with your SNMP application.

You specify SNMP settings from the SNMP Configuration page. To display this

page, click Advanced in the Web

Management

utility menu bar and then click

SNMP Configuration in the navigation panel.

Table 2-5 on page 2-19

describes the fields on this page.

2–18 Advanced Configuration (Expert Users Only)