User's Manual

PlugLAN 8660 Smar
t
Bridge AV Ethernet Adapter User’s Guide
Using the IP Address Menu
Configuring IP Address
The IP Address menu lets you set or change the IP address for the device. You
can use this IP address to manage your PlugLAN 8660 SmartBridge AV
Ethernet Adapter. To display this page, click IP Address in the Web
Management utility menu bar.
Table 2-
6 describes the fields on this page.
Figure 2-18: IP Address
Page
Table 2-6: IP Address Page
Field Description
Obtain an IP address automatically Select this option if the PlugLAN 8660
SmartBridge will obtain its IP address
automatically (for example, from a DHCP
server).
Use the following IP address Select this option if the PlugLAN 8660
SmartBridge will obtain its IP address
manually from the settings you specify in the
following three fields.
IP Address Enter the IP address for the PlugLAN 8660
SmartBridge.
Subnet Mask Enter the subnet mask for the PlugLAN 8660
SmartBridge.
GAteway IP Address Enter the gateway IP address for the
PlugLAN 8660 SmartBridge AV Ethernet
Adapte
Configuring IPV6 Address
This page allow user to set or change the IPV6 address for the device,
2–20 Advanced Configuration (Expert Users Only)