User's Manual

PlugLAN 8660 Smar
t
Bridge AV Ethernet Adapter User’s Guide
Web Management Utility Times Out Too Quickly
By default, the Web Management utility remains open for 3 minutes. If you
want to change this time interval, change the
auto-logout time on the System
Password page (see
Changing the Auto-Logout Time on page 2-6).
One of the LEDs Does Not Behave as Expected
1. Be sure you understand the normal behavior of the LED (see Appendix A).
2. Disconnect and reconnect the PlugLAN 8660 SmartBridge AV Ethernet
Adapter to the AC outlet.
3. If the problem continues, please contact Asoka Technical Support (see
Technical Support on page iii).
You Forgot the Login Password
1. The default case-sensitive password is welcome. You can change this
password to one that is more meaningful using the Web Management
utility. For more information, see
Changing the User ID and Login
Password on page 2-5
.
2. If you forget the password, return the PlugLAN 8660 SmartBridge AV
Ethernet Adapter to its factory default settings (see
Returning to
Factory Default Settings on page 2-8
).
.
CAUTION! If you return the PlugLAN 8660 SmartBridge AV
Ethernet Adapter to factory default settings, the Adapter discards all
custom settings you set and returns to the settings that were in effect
when you removed
the bridge from the box.
NOTE:
All Powerline devices on your Powerline network must use the same
Powerline password (NEK). If you encounter a problem, please contact Asoka
Technical Support (see
Technical Support on page iii).
3–2 Troubleshooting