User's Manual

B–2 Components
PlugLink AV 9660 Ethernet Adapter User’s Guide
The following table describes the status light functions in the front panel:
Bottom Panel
The bottom panel of the PL9660-ETH contains the following components:
• RJ-45 Ethernet port
• Firmware reset button
•Network ID button
• Regulatory information
• Electronic information
• Support information
Rear Panel
The label on the rear panel of the PlugLink AV 9660 Ethernet Adapter contains
the information listed below.
• MAC address
• Model number
•Part number
• Serial number
• Unique device password
Status Light State Indication
Power Illuminated
Off
Device is powered on
Devices has no power
PLC Activity Blinking Red
Blinking Yellow
Blinking Green
Off
Traffic is running at < 7 Mbps
Traffic is running at > 7 Mbps and < 40 Mbps
Traffic is running at > 40 Mbps
No activity on powerline
(should blink intermittently)
Eth Link Illuminated
Blinking
Off
Ethernet connectivity
Ethernet traffic
No ethernet connectivity