User's Manual

PlugLink HD AV Y-Cable Adapte
r
Page
11
Chapter 5
Installing the PlugLink HD AV Y-Cable Adapter
Note: Do not connect the PlugLink HD AV Y-Cable Adapter into a power strip,
extension cord, uninterruptible power supply (UPS), or surge protector. This
may
prevent the unit from working properly or degrade the network performance.
Follow the instructions below to install your PlugLink 9665 -12D :
1. Connect each of your PlugLink HD AV Y-Cable Adapter units to wall outlets near
your Cable/DSL Router and IP-enabled
device .
2.
Connect Ethernet connector of the PL9665-12D to one of the LAN ports of the
Cable/DSLrouter.
3. Connect power connector of the PL9665-12D to the power port of the Cable/DSL
router.