User's Manual

7 of 38
Other Connections
You can also use the PlugLink-ETH-500 with other Ethernet enabled devices, such as
IP Cameras, IP set top box, game consoles, etc.
“Up to eight (8) PL9672 can be placed
on the same PLC (Powerline Communication) network.”
Finding a Suitable Location
Find a suitable location to install your PlugLink-ETH-500 . Where you install the units
can affect their performance. Find a location that is:
z Acceptable temperature and humidity ranges.
z Free of strong electromagnetic field generators (such as motors), vibration, dust,
and direct exposure to sunlight.
z An electrical outlet for your PlugLink-ETH-500 . Outlet must
be within six feet (1.82
meters) of the device you are connecting to.
Installing the Hardware
Connect each of your PlugLink-ETH-500 .
1. Connect the unit into a nearby wall outlet (Do not plug the adapter into a power
strip).
2. Connect the enclosed Ethernet cable to the Ethernet port of the unit.
3. Connect the other end of the cable to the Ethernet port of the PC or device.
Congratulations! You have completed the installation of the
PL9672 for normal use.