User's Manual

26 of 39
PlugLink 500G Pass-Through Adapter

Manually Resetting the Firmware and Network ID (NID)
You can use the buttons on your PlugLinkAV device to reset the firmware back to its
factory defaults, and to create or associate your PlugLink 500G Pass-Through Adapter
to a randomized Powerline Network. For details on how to use the buttons on your
PlugLinkAV adapter, please refer to page 33 of this manual.
Note: The PlugLinkAV device must be plugged into an electrical outlet
when using these buttons. If you have questions, please contact Asoka USA
Technical Support at [phone].