User's Manual

35 of 39
PlugLink 500G Pass
-
Through Adapter
Notes:

1. The other devices already in the Power line network with the proper NEK
are not affected and do not need to be reconfigured.
2. If you disconnect power from any device, its NEK value will remain and will
not default back to “HomePlugAV” NEK.


3. An adapter can only generate a private key once. To replace a private key,
first reset the unit back to its factory defaults by pressing the Firmware
Default Reset (FW RST) button for 1 second, then follow the procedure
above.
The use of the SECURITY (Network ID) button is optional. You may also
use the application software described in the manual to set NEK's as
well.