User's Manual

7 of 39
PlugLink 500G Pass-Through Adapter
Other Connections

You can also use the PlugLink 500G Pass-Through Adapter with other Ethernet
enabled devices, such as IP Cameras, IP set top box, game consoles, etc.
“Up to eight
(8) PL9677 can be placed on the same PLC (Powerline Communication) network.”
Finding a Suitable Location
Find a suitable location to install your PlugLink 500G Pass-Through Adapter. Where
you install the units can affect their performance. Find a location that is:
z Acceptable temperature and humidity ranges.
z Free of strong electromagnetic field generators (such as motors), vibration, dust,
and direct exposure to sunlight.
z An electrical outlet for your PlugLink 500G Pass-Through Adapter. Outlet must
be is
within six feet (1.82 meters) of the device you are connecting to.
Installing the Hardware
Connect each of your PlugLink 500G Pass-Through Adapter.
1. Connect the unit into a nearby wall outlet (Do not plug the adapter into a power
strip).
2. Connect the enclosed Ethernet cable to the Ethernet port of the unit.
3. Connect the other end of the cable to the Ethernet port of the PC or device.
Congratulations! You have completed the installation of the
PL9677 for normal use.