User's Manual

8 of 39
PlugLink 500G Pass-Through Adapter
Advanced Configuration
(Expert Users Only)
This chapter provides information on installing and setting up the
PlugLink 500G Pass-
Through Adapter.
NOTE: Do not connect the PlugLink 500G Pass-Through Adapter into a power
strip, extension cord, un-interruptible power supply (UPS), or surge protector. This
may prevent the unit from working properly or degrade the network performance.
Installing the Software
Following are software installation procedures for advanced users.
NOTE: Software installation is not required for normal use. The utility is used to
change the security settings and view information about the network.
1. Insert the enclosed Installation Resource CD into your CD-ROM drive If the PlugLink
500G Pass-Through Adapter Installation Utility does not appear within 30 seconds,
select your CD-ROM drive and double-click the Setup.exe icon to start the
Installation Utility.
2. Select the language preference, and click the Run button.