User`s manual

61
C. Intranet + Internet
Connects to Internet with Fixed Public IP Address
If the camera will be added into a local network (LAN), and will be accessed via both
Intranet and Internet, please refer to the figure below for the connection.
 Assume the local network will be connected to Internet with ADSL connection, first,
configure the router (or IP sharing) with the ADSL connection. Please refer to the
user’s manual of router for the configuration.
 Connect the cameras to the Switch.
 Refer to Configuration  Network  Network page to configure the IP settings.
 Configure the cameras with different IP address. Ex. assign camera1 to
192.168.1.200, and assign camera2 to 192.168.1.201
 Please make sure the IP address of Router, PC and cameras are in the same subnet.
Ex. 192.168.1.2 and 192.168.1.200 have the same subnet.
ADSL
Public
IP: 60.220.20.250
PC1
IP
Address: 192.168.1.2
Subnet Mask: 255.255.255.0
Gateway:
192.168.1.254
Camera 1
IP
Address: 192.168.1.200
Subnet Mask: 255.255.255.0
Gateway:
192.168.1.254
Http
Port: 80
RTSP Port:
554
Camera 2
IP
Address: 192.168.1.201
Subnet Mask: 255.255.255.0
Gateway:
192.168.1.254
Http
Port: 80
RTSP Port:
555
Switch
Router o
r IP Sharing
IP
Address: 192.168.1.254
Subnet Mask:
255.255.255.0
Intranet (LAN)
Internet (WAN)
3G Mobile Phone
To allow the cameras can be linked through Internet, set
the NAT, Port Forwarding or Virtual Server as following:
WAN
LAN
Port IP Address Port
3081
192.168.1.200
80
554 192.168.1.200 554
3082
192.168.1.201
80
555 192.168.1.201 555
PC2