Use & Care Guide

What should be used as a trim or an edge treatment?
Aspect should be treated like any other tile. Clear or colored caulk is a good option. Caulk can be
painted to match wall color if preferred. Wood, plastic or other types of trim also work well
depending on your preference and abilities.
Can Aspect be applied to a working surface or to the floor?
These applications are not recommended, as the rubbing could potentially scratch the surface of
the panel.
What is the life expectancy of the Aspect Tile?
Aspect tiles and panels will last well-beyond the lifetime of your kitchen, bath or wall project.
The tiles and panels are virtually indestructible under normal use.
Does the surface of an Aspect tile scratch easily?
Not easily, but it can be scratched like any coated metal surface.
When starting a project, would I work from one side to the other, or from the center out?
Working from the center out would balance the working area and ensure your largest tiles in the
middle of your space. This could be important when a designer pattern is used. However, you
can start at one end and work to the other.
If I wanted to remove a tile (or a few), how would I do so and what would I use?
For 3 x 6 tiles, start by applying pressure slowly underneath the 3’’ side of a tile and increase
pressure lifting the tile up. Note: Be careful not to damage the adjacent tile. A 1” putty knife or
similar tool that applies even pressure across the surface upon which you are prying is
recommended. Note: subsurface material like drywall may be affected due to the aggressive
nature of the tile adhesive which may require touch up or priming prior to replacing the tile.
Will the “peel and stick” adhesive used to apply Aspect damage the surface it is applied to
if a tile is removed?
Yes, possibly. Caution is advised when removing tile to eliminate as much old adhesive as
possible. Some repairs may be necessary if this happens.
Can I paint the Aspect tiles, and if so with what kind of paint?
It is not recommended as the coating applied to the surface is a high durability material.
What is the flame spread rate on Aspect tiles?