Use and Care Guide

Can Aspect Stone be exposed to heat?
Aspect stone is not intended for direct heat exposure. The adhesive is rated to 250
degrees F.
How should the tiles be cut if a full tile is not needed?
We recommend using tin snips. If using a power chop saw, a good carbide tooth blade is
recommended. Cutting slowly into the panels will prevent chipping. Wear a mask or
respirator to prevent stone dust irritation if using power tools. See Aspect Tile
Installation Guide for additional information.
How do I bend the tiles for inside or outside corners if I do not want a seam?
It is stone and not intended to be bent. For inside and outside corners, cut the tile
accordingly and abut them to each other.
What should be used to clean the tiles?
Use soap and water for standard cleanup. If you need a more aggressive cleaner, use a
stone cleaner available at any home center.
What should be used as a trim or an edge treatment?
You can caulk exposed edges with a colored caulk similar to the color of your stone, or
use a trim piece like wood to match your cabinets. We also offer Aspect Edge Trims for
our metal tiles in five colors. Some of these look great with stone tiles.
Can Aspect Stone be applied to a working surface or to the floor?
No. Aspect Stone tile is intended for wall surfaces only.