Instructions / Assembly

Mark
horizontal
and
vertical
reference
points
jig saw
The adhesive on the back side of the
Aspect tiles is engineered to be both
highly-aggressive and pressure-
sensitive
DO NOT bend the tile backwards
Lightly place the tile onto the wall
Measure,
map out,
and mark
where the
cut must be
made
Cut the tile
using the
recom-
mended
cutting
tools
Caulking the counter top seam
Use sand-
paper or a
small metal
le to de-
bur sharp
edges
Do not apply pressure until you are sure
of your placement
Place each section as if placing a
puzzle piece