Installation Guide

Decorative Thermoplastic Panels

Fasäde

How to Install Fasade Outlet Cover Laminates

Using a utility or Exacto

knife, cut a rectangle

around outlet cover

leaving an extra 1/2”

around the cover.

Fold edges over cover.

Cut away switch hole

and screw holes with a

utility knife or hobby

knife.

Your matching outlet

cover is now ready to be

installed.

Peel off backing and lay

laminate face down on

your work surface.

Place the outlet cover

face down in the center

of the laminate.

Cut away small squares

at each corner to allow

fold.

PAGE 1
Fasäde ® Decorative Thermoplastic Panels How to Install Fasade Outlet Cover Laminates 1. Using a utility or Exacto® knife, cut a rectangle around outlet cover leaving an extra 1/2” around the cover. 5. Fold edges over cover. 2. Peel off backing and lay laminate face down on your work surface. 6. Cut away switch hole and screw holes with a utility knife or hobby knife. 3. Place the outlet cover face down in the center of the laminate. 7. Your matching outlet cover is now ready to be installed. 4.