User's Manual

- 69 -

C: Connecting to audio equipments

1. TV set (optional)

2. DVD/CD/ TUNER/AMPLIFIER combination

player

3. Audio cords (optional)

4. AC power cord cable

5. 75 Ohm coaxial cable(optional) connected

to Coaxial In socket on sound equipments

6. Audio cord connected to active subwoofer

speaker or subwoofer input port on sound

equipments

7. Audio cord connected to Center speaker.

8. Audio cords connected to SR/ SL speaker

9. Audio cords connected to FR/ FL speaker

10~15. 5.1CH speakers

Note:

Regarding the interconnections of sound equip-

ments with other units, please refer to their

instructions.

Relevant settings:

Note:

 According to the sound equipment, you can

choose any connection item out of No. 3, 5,

and 10; any will be fine for operating the

player.

 If the player is connected to the sound equip-

ments by 5.1 CH, please set Front, Center,

Surround (Rear) and Subwoofer item in Au-

dio submenu to On.

 When connecting the player to an external

decoder or an amplifier with decoder, if a

DVD disc recorded in MPEG format is played,

there will be bit stream output from Coaxial

output jack. Once the MPEG decoder or an

amplifier with such decoder is connected with

coaxial cable, theater-like sound quality will be available even at home.

 Don’t connect am amplifier that does not support DTS/ MPEG decoding to digital Coaxial output

port, otherwise, some extreme high-level noise will possibly arise, which may do great harm to

both your hearing and the speakers.

 During playback of DTS discs, be sure to set the output mode to RAW accordingly, otherwise,

there will be no audio signal output from the Coaxial jack.

BASIC CONNECTIONS