ASPA-400 Smart Air Purifier
Table of Contents What’s in the Box What’s in the Box 1 Safety Precautions 2 Technical Specifications 3 LED Information 4 Setup / Getting Started 6 Setup / Download Aspen Home App 8 Setup / Pairing Your Device 9 1 2 Setup / Inside The App 11 How To Replace The Filter 13 Care & Maintenance 15 FAQ 17 FCC Statement 19 Warranty 20 3 4 Instruc 1. 2. 3. 4.
Safety Precautions Technical Specifications The following safety precautions and instructions must be read Product specifications carefully and observed the product is used! Prohibitory Sign Warning Sign Attention Sign 2 The behaviors with this sign must be prohibited, otherwise it may cause product damage or endanger the user’s personal safety.
LED Information LED Information LED Ring LED Ring Color Air Quality Excellent Air Quality On/Smart(Auto) Low Medium Tap once to turn on the unit and set it to Smart Mode (Glowing LEDs) Tap second time to set to Low speed (Single Solid LED) Tap third time to set to Medium speed (2 Solid LEDs) Green Good Air Quality Blue High Turn Off/Standby Replace Filter Tap set to set to High speed (3 Solid LEDs) Tap and hold for 3 seconds till the power icon turns red.
Setup / Getting Started Setup / Getting Started 4 3 1 2 5 6 1. Pull the panel off the device by pulling from the top. 2. Remove the new filter from inside the device to remove plastic wrapping from filter. 6 3. After plastic wrapping is removed from the filter, place the filter back inside the device. 4. Place the panel back on top. 5. Connect the power cord to a power outlet 6. Push the control button to power on the unit. A red light will indicate the device is off/standby mode 7.
Setup / Download Aspen Home App • • Setup / Pairing Your Device Download the Aspen Home App form the Apple App Store or Google Play Store. Create a new account with your email address or login to your existing account. 1. Press and hold the control button for 7 – 10 seconds to start pairing (Ignore first beep around 3 seconds) 2. The device will beep a few times and the LED will begin to flash red and blue. This means pairing mode is now active and you can pair to the app on your phone. 3.
Setup / Pairing Your Device Setup / Inside The App Inside the app you will be able to see your air quality, adjust your fan speed, set a schedule to turn the fan on and/or off, and reset your filter life after replacement Air Quality Color know your indoor air quality right in your phone with color indicator Timer 4. Open the App from the home screen of your phone 5. Tap the “Add Device” button 6. Select the device you want to pair with and follow on screen instructions to complete pairing 7.
How To Replace The Filter Setup / Inside The App 1 2 See what your air quality is like Turn On/Off Fan, control fan speed, and setup a schedule Turn On/Off the child lock setting and the device LED light A 7 Day line chart shows the Fine particles levels in the past week 1. Pull the panel off the device by pulling from the top. 2. Remove the new filter from plastic wrapping Check your filter life and reset your filter after installing a new filter and order a new filter.
How To Replace The Filter Care & Maintenance 4 3 Cleaning Instruction To avoid scratching the control panel, do not use abrasive/ caustic cleaning solutions or scrubbing pads. With the unit unplugged, dampen a clean towel lightly with soap and water to clean the control panel, then dry gently with a soft cloth or paper towel. Glass cleaner (e.g. Windex) is also OK. To avoid damaging electronic components, DO NOT allow liquid to seep into the unit.
Care & Maintenance FAQ Replacing The Filter Why doesn’t the device turn on? The Filter Indicator has four lights: Green, Blue, Yellow, and Red. The Green light will be illuminated for most of the life of the filter. The yellow light will come on shortly before your filter should be re-placed. This is the ideal time to order a new filter. You may order a new filter at www.theaspen.com/accessories or by calling (877) 365-3464 The Red light will be illuminated when it is time to replace the filter.
FAQ FCC Statement Can I clean the filter? This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Warranty Warranty ONE YEAR LIMITED WARRANTY THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE The Company hereby warrants to the original retail purchaser of this product that, should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within one year and 90 days labor from the date of original purchase, such defect(s) will be repaired or replaced with a reconditioned product (at the Compa
Copyright© 2022 Aspen Appliances Inc. All rights Reserved.
