User Manual

6 7
Setup / Getting Started Setup / Getting Started
1. Pull the panel off the device by pulling from the top.
2. Remove the new lter from inside the device to remove
plastic wrapping from lter.
3. After plastic wrapping is removed from the lter, place the
lter back inside the device.
4. Place the panel back on top.
5. Connect the power cord to a power outlet
6. Push the control button to power on the unit. A red light
will indicate the device is off/standby mode
7. Now your device is ready to be paired to the
Aspen Home App
1
3
2
4
5
6