Operating instructions

１３

Back Panel

1. RF IN / OUT - For Antenna or Cable TV

connection. Pass through connection to TV does not

transfer the output signal from the DVD Recorder.

*Some units do not have a Pass through connector. In this

case, use a splitter (See page 16).

2. VIDEO1 INPUT - Composite Video input for

recording. To select this input, use the SOURCE button

and choose VIDEO IN 1.

3. S-VIDEO1 INPUT - S-VIDEO input for recording. To

select this input, use the SOURCE button and choose S-

VIDEO IN 1.

4. STEREO AUDIO INPUTS - Use with S-VIDEO1 IN

1or VIDEO1 IN 1for recording.

5. COMPONENT/PROGRESSIVE SCAN VIDEO

OUTPUT - Use this output with TVs supporting

Component Video or Progressive Scan input for best

video quality. Select this output in the DVD Recorder’s

SETUP MENU.

6. COAXIAL DIGITAL AUDIO OUTPUT - Use a

special coaxial digital audio connector to send the raw

coded digital signal to devices supporting digital

decoding.

7. COMPOSITE VIDEO OUTPUT - Standard Video

Output supported by most TVs.

8. S-VIDEO OUTPUT - Connect to TVs with S-VIDEO

in for better picture quality than standard composite

video.

9. OPTICAL DIGITAL AUDIO OUTPUT - Use to

connect to a receiver or other device with 5.1 channel

decoders. This output is the coded digital signal.

10. 5.1CH AUDIO OUTPUT - Connect to TVs or other

Audio equipment supporting 5.1CH audio in.

11.POWER CABLE

FUNCTIONAL OVERVIEW