Operating instructions

１５

S-Video

This is a higher quality connection than standard composite video, and requires a special S-Video cable not included. The

S-Video connector is distinguishable by its 4 pins, as shown below. If your TV has an S-Video input, it’s recommended that you

use this type of connection for better picture quality.

Component Video

The highest quality video connection, component video requires separate cables for the Y, Pb, Pr signals. To use the progressive

scan option on this unit, you’ll need to use the component video output. Using the component video output requires these steps:

CONNECTIONS

First, use the supplied A/V cable to connect to the

composite video input on your TV. Select this input.

Change the TV TYPE to YUV by press the VIDEO/Y key

on the remote control.

Changing the TV OUT MODE to the progressive scan by

press the PSCAN key. Select the correct video input on

your TV.

Resetting the video output

If you inadvertently switch the OUTPUT FORMAT setting to

PROGRESSIVE while using a standard TV not capable of PSCAN,

you will loose video. If this happens, reset the recorder

to its default video settings by pressing PSCAN on the remote.

Component Video

Input Jacks

capability