Vision 3D Series User Manual Version 1.0 Published September 2010 Copyright©2010 ASRock INC. All rights reserved.
Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Safety instructions Your system is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system • • • • • • Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source such as a radiator. Set up the system on a stable surface. Openings on the chassis are for ventilation.
Safety cautions and warnings Optical Drive Safety Information Optical drives sold with this system contains a CLASS 1 LASER PRODUCT. CAUTION: Invisible laser radiation when open. Do not stare into beam or view directly with optical instruments. WARNING: Making adjustments or performing procedures other than those specified in the user’s manual may result in hazardous laser exposure. Do not attempt to disassemble the optical drive.
Contents 1 Introduction ................................................... 7 1.1 1.2 1.3 1.4 1.5 1.6 2 3 4 5 6 7 8 Package Contents .......................................................... Specifications ................................................................ System Motherboard Components ............................... Rear Panel Connections ................................................ System Chassis ............................................................. Remote Controller .........
9.5 9.6 9.7 9.8 9.4.2 Chipset Configuration .......................................... 9.4.3 ACPI Configuration ............................................... 9.4.4 Storage Configuration ......................................... 9.4.5 USB Configuration ............................................... Hardware Health Event Monitoring Screen .................. Boot Screen ................................................................... 9.6.1 Boot Settings Configuration ..................................
Chapter 1 Introduction Thank you for purchasing ASRock Vision 3D Series, a reliable product produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance. In this manual, chapter 1 and 2 contain introduction of the hardware and step-bystep guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to BIOS setup and information of the Support CD.
1.2 * Specifications For barebone system, it may not contain CPU, memory, HDD or ODD. Processor Support Intel® Core TM i3/i5/i7 Mobile Processor Chipset Mobile Intel® HM55 Express chipset*1 Memory Support DDR3 1066MHz, 2 x SO-DIMM slots, maximun up to 8GB Display NVIDIA® GeForce GT425M Graphics, NVIDIA® 3D Vision capable HDD Support 2.5” SATA HDD ODD BD Combo or DVD Super Multi Front I/O 2 x USB 3.
1.3 System Motherboard Components 1. SATA connector: For HDD SATA data cable 2. SATA connector: For HDD SATA data cable 3. ATX5V output power connector for slim ODD & 2.5” HDD 4. SATA connector: For ODD SATA data cable 5. SATA power cable connector (+5V/+12V) for second HDD 6. Fan connector 7. HM55 PCH chipset 8. Memory socket 9. Infrared module header 10. CPU 11. Clear CMOS jumper 12. Mini-PCI Express expansion slot: For WiFi module 13. MXM 3.
NOTE. 1. SATA and Power Connections Connect to ODD SATA & Power Connections HDD ODD Connect to HDD Connect to SATA Connector (4) Connect to ATX5V Power Connector (3) Connect to SATA Connector (1) 2.
1.4 Rear Panel Connectinos 14. HDMI connector 15. eSATAII connector 16. DVI-I port (Dual-Link) 17. USB3.0 ports: USB devices 18. Mic In (Pink): Microphone 19. Optical S/PDIF Out port 20. DC-In jack 21. Side port for side speakers 22. Center/LFE (Orange): Center / subwoofer speakers 23. Front L/R Out (Lime): Stereo speakers or headphones 24. Line In (Blue) for 2/4/6 channel; Rear (Blue) for 8 channel 25. LAN (RJ-45) port: Local Area Network 26. USB2.
1.5 System Chassis 27. Headphone 28. Microphone 29. USB3.0 ports: USB devices 30. 4-in-1 Card reader (MMC/SD/MS/MS Pro) 31. Power ON/OFF button with status indicator 32.
1.6 Remote Controller Some remote controller functions listed above are only available with the relative hardware equipments. If the hardware equipments you adopt are not compatible with the system, you are not allowed to use these functions. This product is designed to meet MCE standards.
Chapter 2 Opening the chassis 1. Press the button on the rear I/O to open the top side of the chassis. 2. After the chassis is opened, you will see the top shield inside the chassis. 3. Unscrew the screws on the corner of the top shield. 4. Carefully take the top shield out.
Chapter 3 Reinstalling the ODD/HDD 1. After you remove the top shield, you will see the ODD/HDD bracket. 2. Disconnect the ODD/HDD SATA power cable, and take out the ODD/HDD bracket. 3. Disconnect all the ODD/HDD SATA power cables inside the chassis. 4. Then you can change the new ODD/HDD to upgrade your system.
Chapter 4 Reinstalling the DIMMs 1. Unlock the DIMM slot by pressing the retaining clips outward to change the DIMM.
Chapter 5 Reinstalling the CPU 1. Unscrew the screws of the CPU fan. 2. Unscrew the screws on the corner of the CPU socket. 3. Now you can reinstall a new CPU to the system.
Chapter 6 Reinstalling the MXM card 1. Unscrew the screws of the heatpipe on the MXM card. 2. Use your fingers to pull the outer side of the heatpipe upward. 3. Finally you can take out the heatpipe and change a new MXM card.
Chapter 7 Driver Installation To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you install can work properly.
Chapter 8 Utility Menu The utilities meu shows the applications and other software that this product supports. 8.1 Instant Boot 8.1.1 Introduction Instant Boot, a user-friendly tool that allows you to turn on your PC in just a few seconds, provides a much more efficient way to save energy, time, money, and improves system running speed for your system *. It is applicable to Windows® 7 / 7 64-bit / Vista™ / Vista™ 64-bit / XP / XP 64-bit.
8.1.2 Installation Please read below procedures carefully before you install Instant Boot. A. Install Instant Boot driver from ASRock support CD, or you may click following link to get the latest utility and BIOS: http://www.asrock.com/feature/InstantBoot/download.asp B. Execute the Instant Boot installation program under Windows®. Please follow the instructions on Instant Boot setup page. a. Click “Next” to continue. b. Select destination location.
d. Click “Install” to begin installing Instant Boot driver. e. Click “Finish” to complete and exit the setup. C. After the installation is completed, you will find an ASRock Instant Boot icon on the Windows® desktop. D. Double click ASRock Instant Boot icon on the desktop, then Instant Boot main menu will pop up. E. On Instant Boot main menu, you can choose “Fast Mode”, “Regular Mode” or “Disable Instant Boot”. After that, please click “Apply” to save the change.
H. Next time when you turn on your system, you can enjoy the benefit of Instant Boot. 8.2 ASR ock OC TTuner uner ASRock 8.2.1 Introduction ASRock OC Tuner is a user-friendly overclocking tool which allows you to guard your system by hardware monitor function and overclock your hardware devices to get the best system performance. There are 3 major sections that are easy to fine-tune and monitor: Overclocking, Voltage Control, and Hardware Monitor.
b. Select destination location. You may choose a different folder if you need, and click “Next”. c. Select the start menu folder. You may choose a different folder if you need, and click “Next”. d. Click “Install” to begin installing ASRock OC Tuner driver. e. Click “Finish” to complete and exit the setup.
C. After the installation is completed, you will find an ASRock OC Tuner icon on the Windows® desktop. D. Double click ASRock OC Tuner icon on the desktop, then ASRock OC Tuner main menu will pop up. Auto apply when program starts If you check this button, it will save your settings when you close OC Tuner window. And next time when you run OC Tuner, it will start with the settings you made. If you do not check this button, next time when you run OC tuner, it will start with the default settings.
System Health – In the System Health section, there are two major chapters: System Health and CPU Quiet Fan. Under the System Health chapter, it shows the major readings of CPU, chipset and GPU Temperature. You may find out if there’s any abnormal situation occurs to your system’s temperature. Under the CPU Quiet Fan chapter, the Chassis Fan Speed will show the default settings of your system. You are able to adjust the setting too by clicking the “Up/Down” arrows and confirm by “Go” afterward.
8.3 CyberLink D VD Suite free bundle (T rial version DVD (Trial version,, including PowerDVD, PowerDirector, etc) CyberLink DVD Suite includes five softwares: PowerDVD, PowerBackup, PowerDirector, Power2Go and MediaShow. Please read below description for details. PowerDVD World-renowned and award-winning PowerDVD delivers the ultimate DVD and high-definition movie experience on the PC. Feature-rich nevigation controls enhance and personalize the movie experience.
PowerDirector CyberLink PowerDirector provides cool features to ensure editing movies is fun and fast! Whether you are an advanced or entry-level video editor, PowerDirector lets you enhance your camcorder videos and produce professional home movies. PowerDirector offers a dual mode editing interface, comprehensive production tools, technologies that save time and maintain your video quality, and a built-in CD/DVD authoring program.
8.4 CyberLink PowerDVD 10 Blu-ray 3D OEM version PowerDVD 10 The No. 1 Movie Experience on PCs Upgrade Your Media Experience to HD & 3D Upgrade your Blu-ray experience to whole new level with Blu-ray 3D and bring the 3D cinema experience back home with PowerDVD 10. With support for the latest 3D hardware combined with PowerDVD's leading playback features and technologies, PowerDVD 10 allows you to enjoy your movies like you're at the center of all the actions.
8.5 Symantec Norton AntiVirus Software free bundle (Trial (T rial version) Protect your PC with Norton Internet Security, the fastest virus, spyware, Internet protection. Norton Internet Security can stop online identity theft, viruses, spyware, bots and more, stop attacks before they get on your PC, deliver clear threat and performance explanations, identify unsafe web sites right in your search results, and use intelligence-driven Norton Insight Network for faster, fewer, shorter scans.
8.6 THX TTruStudio ruStudio PRO Sof tware free bundle Software After you install THX audio driver from our support CD, there will be a shortcut shown on the desktop. Please double-click this icon to install THX audio driver to your system. Please make sure to connect your system to the internet during installation process. Then your system will automatically connect to THX’s website to active. After the installation completes, the shortcut will be auto-removed.
8.7 ASRock AIWI Utility To experience intuitive motion controlled games is no longer only available at Wii. ASRock AIWI utility introduces a new way of PC gaming operation. ASRock AIWI is the world's first utility to turn your iPhone/iPod touch as a game joystick to control your PC games.
8.8 The best Apple charge companion - ASRock APP Charger Fast Charge & Charge Anytime! If you desire a faster, less restricted way of charging your Apple devices, such as iPhone/iPod/iPad Touch, ASRock has prepared a wonderful solution for you ¡V ASRock App Charger. Simply installing the App Charger driver, it makes your iPhone charged much quickly from your computer and up to 40% faster than before*.
Chapter 9 BIOS SETUP UTILITY 9.1 Introduction This section explains how to use the BIOS SETUP UTILITY to configure your system. The BIOS chip on the system stores the BIOS SETUP UTILITY. You may run the BIOS SETUP UTILITY when you start up the computer. Please press or during the Power-On-Self-Test (POST) to enter the BIOS SETUP UTILITY, otherwise, POST will continue with its test routines.
9.1.2 Navigation Keys Please check the following table for the function description of each navigation key.
9.3 OC TTweak weak er Screen weaker In the OC Tweaker screen, you can set up overclocking features. Main OC Tweaker BIOS SETUP UTILITY Advanced H/W Monitor Boot Security Exit OC Tweaker Settings Load CPU EZ OC Setting Load Memory EZ OC Setting CPU EZ OC Setting : 3.
DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assigns appropriate frequency automatically. You may select [Auto], [400MHz DDR3_800)] or [533MHz DDR3_1066)]. DRAM Timing Control Use this item to control DRAM Timing.
DRAM tRRD This controls the number of DRAM clocks for TRRD. Configuration options: Configuration options: [Auto], [4] to [7]. DRAM tRTP This controls the number of DRAM clocks for TRTP. Configuration options: [Auto], [2] to [13]. DRAM tFAW This controls the number of DRAM clocks for TFAW. Configuration options: [Auto], [1] to [63]. DRAM Command Rate Use this item to adjust DRAM Command Rate. Configuration options : [1], [2] and [Auto]. VCORE Voltage Use this to select VCORE Voltage.
9.4 Advanced Screen In this section, you may set the configurations for the following items: CPU Configuration, Chipset Configuration, ACPI Configuration, Storage Configuration and USB Configuration. Main BIOS SETUP UTILITY Boot OC Tweaker Advanced H/W Monitor Advanced Settings Security Exit Options for CPU WARNING : Setting wrong values in below sections may cause system to malfunction.
9.4.1 CPU Configuration BIOS SETUP UTILITY Advanced Configure advanded CPU settings Intel (R) Core (TM) i5 CPU M 520 @ 2.40GHz Frequency :3.
Active Processor Cores Use this item to select the number of cores to enable in each processor package. Configuration options: [All], [1] and [2]. The default value is [All]. A20M Use this item to enable or disable A20M. Legacy OS and AP may need A20M enabled. The default value is [Disabled]. Intel (R) SpeedStep(tm) tech. Intel (R) SpeedStep(tm) tech. is Intel’s new power saving technology. Processor can switch between multiple frequency and voltage points to enable power savings.
C1 Audio Demotion When this item is enabled, CPU will conditionally demote C3/C6/C7 requests to C1 based on uncore auto-demote information. C3 Audio Demotion When this item is enabled, CPU will conditionally demote C6/C7 requests to C3 based on uncore auto-demote information.
9.4.2 Chipset Configuration BIOS SETUP UTILITY Advanced Chipset Settings Share Memory Onboard HD Audio OnBoard Lan Dr. LAN Link speed : 0 Mbps Energy Efficient Ethernet Onboard Card Reader Legacy Support [Auto] [Enabled] [Enabled] [Disabled] [Enabled] [Disabled] Intel VT-d Configuration MXM Thermal Support [Auto] +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
9.4.3 ACPI Configuration BIOS SETUP UTILITY Advanced ACPI Configuration Suspend To RAM Check Ready Bit [Auto] [Enabled] Restore on AC / Power Loss Onboard LAN Power On RTC Alarm Power On Onboard CIR Power On [Power Off] [Disabled] [By OS] [Enabled] ACPI HPET Table [Enabled] Deep S5 [Auto] Select auto-detect or disable the STR feature. +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
9.4.4 SA SATTA Configuration BIOS SETUP UTILITY Advanced Options Storage Configuration SATA Operation Mode SATAII_1 SATAII_2 SATAII_3 eSATA1 [IDE] [Not [Not [Not [Not Detected] Detected] Detected] Detected] IDE AHCI Disabled +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. SATA Operation Mode Use this item to adjust SATA Operation Mode. The default value of this option is [IDE].
9.4.5 USB Configuration BIOS SETUP UTILITY Advanced USB Configuration Legacy USB Support USB 2.0 Rate Matching hub [Enabled] [Enabled] Front Onboard USB3 Back Onboard USB3 [Enabled] [Enabled] To enable or disable the onboard USB controllers. USB Keyboard/Remote Power On [Disabled] [Disabled] USB Mouse Power On +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
9.5 Hardware Health Event Monitoring Screen In this section, it allows you to monitor the status of the fan speed. Main OC Tweaker BIOS SETUP UTILITY Advanced H/W Monitor Boot Security Exit Hardware Health Event Monitoring CPU Temperature M/B Temperature : 37 C / 98 F : 31 C / 87 F CPU Fan Speed : N/A Vcore + 3.30V + 5.00V : 1.152V : 3.312V : 5.080V CPU Fan Setting F1 F9 F10 ESC Select Screen Select Item General Help Load Defaults Save and Exit Exit v02.
9.6.1 Boot Settings Configuration BIOS SETUP UTILITY Boot Boot Settings Configuration Full Screen Logo Boot Logo Boot From Onboard LAN Bootup Num-Lock [Enabled] [Auto] [Disabled] [On] Disabled: Displays normal POST messages. Enabled: Displays OEM Logo instead of POST messages. +F1 F9 F10 ESC Select Screen Select Item Change Option General Help Load Defaults Save and Exit Exit v02.54 (C) Copyright 1985-2003, American Megatrends, Inc. Full Screen Logo Use this item to enable or disable OEM Logo.
9.7 Security Screen In this section, you may set or change the supervisor/user password for the system. For the user password, you may also clear it. Main BIOS SETUP UTILITY OC Tweaker Advanced H/W Monitor Boot Security Settings Security Exit Install or Change the password. Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password Change User Password Enter F1 F9 F10 ESC Select Screen Select Item Change General Help Load Defaults Save and Exit Exit v02.
9.8 Exit Screen Main OC Tweaker BIOS SETUP UTILITY Advanced H/W Monitor Boot Exit Options Save Changes and Exit Discard Changes and Exit Discard Changes Load Load Load Load Security Exit Exit system setup after saving the changes. F10 key can be used for this operation. BIOS Defaults Performance Setup Default (IDE/SATA) Performance Setup AHCI Mode Power Saving Setup Default Enter F1 F9 F10 ESC Select Screen Select Item Go to Sub Screen General Help Load Defaults Save and Exit Exit v02.
Chapter 10 Software Support 1 0 . 1 Install Operating System This system supports various Microsoft® Windows® operating systems: 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP / XP 64-bit. Refer to your OS documentation for more information. 1 0 . 2 Support CD Information The Support CD contains necessary drivers and useful utilities that enhance the system features. 1 0 . 2 . 1 Running The Support CD To begin using the support CD, insert the CD into your CD-ROM drive.
