User Guide

ASRock 4Core1333-FullHD Motherboard

3434

EnglishEnglish

English

2.162.16

2.16

Untied Overclocking TUntied Overclocking T

Untied Overclocking T

echnologyechnology

echnology

This motherboard supports Untied Overclocking Technology, which means during

overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you

enable Untied Overclocking function, please enter “Overclock Mode” option of BIOS

setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is

untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can

operate under a more stable overclocking environment.

Please refer to the warning on page 7 for the possible overclocking risk before

you apply Untied Overclocking Technology.

STEP 1: Set up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.

B. Set the “SATA Operation Mode” option to [non-RAID].

STEP 2: Install Windows

Vista

/ Vista

64-bit OS on your system.

Using SATA / SATAII HDDs without NCQ and Hot Plug functions

and click the “Load Driver” button on the left on the bottom to load the ATI

AHCI

drivers. ATI

AHCI drivers are in the following path in our Support CD:

(There are two ASRock Support CD in the motherboard gift box pack, please

choose the one for Windows

Vista

/ Vista

64-bit.)

.. \ I386 (For Windows

Vista

OS)

.. \ AMD64 (For Windows

Vista

64-bit OS)

After that, please insert Windows

Vista

/ Windows

Vista

64-bit optical disk into

the optical drive again to continue the installation.