User Guide

ManualsBrandsASRock ManualsOther4CORE1333-VIIV

4444

ASRock 4Core1333-Viiv Motherboard

EnglishEnglish

English

STEP 1: Set Up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.

B. Set “ATA/IDE Configuration” to [Enhanced], and then in the option

“Configure SATAII as”, please set the option to [AHCI].

STEP 2: Make a SATA / SATAII driver diskette.

Please make a SATA / SATAII driver diskette by following section 2.16.1 step 2 on

page 40.

STEP 3: Install Windows

2000 / XP / XP 64-bit OS on your system.

After making a SATA / SATAII driver diskette, you can start to install Windows

2000

/ XP / XP 64-bit on your system. At the beginning of Windows

setup, press F6 to

install a third-party AHCI driver. When prompted, insert the SATA / SATAII driver

diskette containing the Intel

AHCI driver. After reading the floppy disk, the driver will

be presented. Select the driver to install according to the mode you choose and the

OS you install. You may select: “Intel(R) ICH8R/DO/DH SATA AHCI Controller (Desktop

ICH8R-Windows 2000)” for Windows

2000, “Intel(R) ICH8R/DO/DH SATA AHCI Con-

troller (Desktop ICH8R-Windows XP)” for Windows

XP or “Intel(R) ICH8R/DO/DH

SATA AHCI Controller (Desktop ICH8R-Windows XP64)” for Windows

XP 64-bit.

2.172.17

2.17

Installing WindowsInstalling Windows

Installing Windows

2000 / XP / XP 64-bit / Vista 2000 / XP / XP 64-bit / Vista

2000 / XP / XP 64-bit / Vista

TM TM

VistaVista

Vista

TMTM

64-bit Without RAID Functions 64-bit Without RAID Functions

64-bit Without RAID Functions

If you want to install Windows

2000 / XP / XP 64-bit / Vista

/ Vista

64-bit OS on

your SATA / SATAII HDDs without RAID functions, please follow below procedures

according to the OS you install.

2.17.1 Installing Windows2.17.1 Installing Windows

2.17.1 Installing Windows

2000 / XP / XP 64-bit Without 2000 / XP / XP 64-bit Without

2000 / XP / XP 64-bit Without

RAID Functions RAID Functions

RAID Functions

If you want to install Windows

2000 / XP / XP 64-bit OS on your SATA / SATAII HDDs

without RAID functions, please follow below steps.

Using SATA / SATAII HDDs and eSATAII devices with NCQ function

STEP 1: Set up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.

B. Set “ATA/IDE Configuration” to [Enhanced], and then in the option

“Configure SATAII as”, please set the option to [IDE].

STEP 2: Install Windows

2000 / XP / XP 64-bit OS on your system.

Using SATA / SATAII HDDs and eSATAII devices without NCQ function