Specifications

SuperDVR & WS 401 Series Cards
120
to Figure 3.5), but actually, there is only one valid record mode
for recording.
The priority order of the record modes is: Sensor Alarm Record >
Motion Detection Record > Manual Record > Schedule Record
Appendix 2.2.3 How to set recycling record mode on the
system?
Select ‘Recycle’ in basic configuration, refers to Figure 4.1.
Users can select multiple HDD partitions to save record files. It
won’t cover former files until all the partitions’ available storage
spaces are less than 100MB.
In case users haven’t enabled recycling record mode and the
partitions’ storage spaces are less than 100MB, the alarm will
ring and the HDD usage indicator will turn red.
Tips:
It is recommended that install SuperDVR into the partition
installed with windows system (normally C:), and save record
files in HDD partition D:
Appendix 2.2.4 How to set auto reboot function?
In case Microsoft Windows system continuously runs for a
couple of days, the system may become unsTable , therefore it’s
suggested to restart the computer every few of days.
In the basic configuration (refer to Figure 4.1), input Windows
user name and password (Note: not SuperDVR user name and
password), and select time interval, then the Windows system
will automatically restart according to the set time.
In case the Windows system closed abnormally, i.e. power supply
is cut off, and when computer reboot next time, SuperDVR