Specifications

SuperDVR & WS 401 Series Cards
127
message say this program has not passed windows logo testing,
just “Continued anyway”
Reboot computer once it is completed.
FOR COMPLETE INSTRUCTIONS, REFER TO THE
MANUAL.
Once Boot up, On Desktop there will be “SuperDVR” icon
opened well.
If this program recognizes the PCI card, program will open just
fine. Please log in first to the program.
Once your program is opened, now connect the Camera.
Done.
Troubleshooting:
When opening the SuperDVR program, it says “Can’t find card”
Reboot one more time. If still same problem, click Start program
SuperDVR Install and then Uninstall. Reboot computer. After
reboot, go back to start program SuperDVR install. Now click on
INSTALL to reinstall driver. Then Reboot.
If for some reason still “can’t find card”, uninstall driver again.
Shut down computer. Move PCI Card to another slot. Reboot.
And CANCEL when windows detect it.
Then reinstall driver by going to start program SuperDVR install.
FOR OTHER SETTINGS IN THE PROGRAM PLEASE READ
THE MANUAL.
Q: How to setup the web client to monitor from Internet?