Specifications

SuperDVR & WS 401 Series Cards
40
movement, the system won’t record and that’s helpful for saving
system resource, and convenient for searching for event record file.
The indicator light color in the record status panel is yellow
.
Note: Users may need to setup in three places so as to enable
motion detection record.
Select ‘Motion Detection’ for certain channels in ‘Basic
Configuration’
Configure the motion detection areas for certain channels in
‘Motion Detection configuration’
Configure working schedule for certain channels in ‘Schedule
configuration’
Schedule Record
Users can set working schedule for all kinds of record modes in
‘Schedule configuration’. The green light
in record status
panel shows the corresponding channel is in Schedule Record
mode. Users can change record mode to manual record at any time,
and the green light
will change into blue light .
Please refer to chapter 4.4 for details.
Recycling Record
If users enable Recycling Record function and all the selected
HDD partitions are full, the former record data will be covered by
the latest record data.