Specifications

SuperDVR & WS 401 Series Cards
89
Remote Surveillance Server Configuration
Users should firstly enable the Web Camera Services in Basic
Configuration (refer to Figure 4.1) and set other settings as below:
Figure 7.1 Web cam server configurations
[HTTP Port]: Web service & download service port, default
value is 80
[Data Port]: data transmission port, default value is 1159
[Command Port]: control command port, default value is 1259
[Picture Quality]: default value is higher
Remote Surveillance Client-side Setup
On the client-side, users should firstly install the WebCam
program. And the following is the detailed information.
Input the WebCam server IP address in Internet Explorer and the
following page appears: