User manual

4343
4343
43
Four Activate Window (tFAW)
Use this item to change Four Activate Window (tFAW) Auto/Manual setting.
The default is [Auto].
Voltage Control
Power Saving Mode
Use this to enable or disable Power Saving Mode. The default value is
[Disabled].
CPU Load-Line Calibration
CPU Load-Line Calibration helps prevent CPU voltage droop when the
system is under heavy load.
DRAM Voltage
Use this to select DRAM Voltage. The default value is [Auto].
NB Core Voltage
Use this to select NB Core Voltage. The default value is [Auto].
+1.8V Power Voltage
Use this to select +1.8V Power Voltage. The default value is [Auto].
+1.4V Voltage
Use this to select +1.4V Voltage. The default value is [Auto].
SB Core Voltage
Use this to select SB Core Voltage. The default value is [Auto].
Would you like to save current setting user defaults?
In this option, you are allowed to load and save three user defaults
according to your own requirements.