Owner's Manual

Power Down Enable

Use this item to enable or disable DDR power down mode.

Bank Interleaving

Interleaving allows memory accesses to be spread out over banks on the

same node, or accross nodes, decreasing access contention.

Channel Interleaving

It allows you to enable Channel Memory Interleaving. Conguration op-

tions: [Disabled], [Auto]. The default value is [Auto].

CAS Latency (CL)

Use this item to change CAS Latency (CL) Auto/Manual setting. The

default is [Auto].

TRCD

Use this item to change TRCD Auto/Manual setting. The default is [Auto].

TRP

Use this item to change TRP Auto/Manual setting. The default is [Auto].

HT Bus Width

This feature allows you selecting Hyper-Transport bus width. The default

value is [Auto].

Memory Conguration

Memory Clock

This item can be set by the code using [Auto]. You can set one of the stan-

dard values as listed: [400MHz DDR3_800], [533MHz DDR3_1066],

[667MHz DDR3_1333] and [800MHz DDR3_1600].

DRAM Frequency

If [Auto] is selected, the motherboard will detect the memory module(s)

inserted and assigns appropriate frequency automatically.

Memory Timing