User Guide
Table Of Contents
- Chapter 1 Introduction
- 1.1 Package Contents
- Chapter 2 Installation
- 2.1 Installing the CPU
- 2.2 Installing the CPU Fan and Heatsink
- 2.3 Installing Memory Modules (DIMM)
- 2.4 Expansion Slots (PCI and PCI Express Slots)
- 2.5 Jumpers Setup
- 2.6 Onboard Headers and Connectors
- 2.7 CrossFireXTM and Quad CrossFireXTM Operation Guide
- 2.7.1 Installing Two CrossFireXTM-Ready Graphics Cards
- 2.7.2 Driver Installation and Setup
- 2.8 M.2_SSD (NGFF) Module Installation Guide
- Chapter 3 Software and Utilities Operation
- Chapter 4 UEFI SETUP UTILITY
- 4.1 Introduction
- 4.2 EZ Mode
- 4.3 Advanced Mode
- 4.4 Main Screen
- 4.5 OC Tweaker Screen
- 4.6 Advanced Screen
- 4.6.1 CPU Configuration
- 4.6.2 Chipset Configuration
- 4.6.3 Storage Configuration
- 4.6.4 Intel® Thunderbolt
- 4.6.5 Super IO Configuration
- 4.6.6 ACPI Configuration
- 4.6.7 USB Configuration
- 4.6.8 Trusted Computing
- 4.7 Tools
- 4.8 Hardware Health Event Monitoring Screen
- 4.9 Security Screen
- 4.10 Boot Screen
- 4.11 Exit Screen
78
English
Launch PXE OpROM Policy
Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Select Do not launch to not
execute both legacy and UEFI option ROM.
Launch Storage OpROM Policy
Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Select Do not launch to not
execute both legacy and UEFI option ROM.
Launch Video OpROM Policy
Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Select Do not launch to not
execute both legacy and UEFI option ROM.