Installation Manual

8
STEP 3.1: Copy RAID driver to a USB flash drive
You can choose either STEP 3.1 or STEP 3.2 to finish the configuration.
A. Please install the DVD-ROM.
B. During system boot, press <F2> or <Del> key to enter UEFI setup utility.
C. Plug a USB drive into one of the USB port.
D. Insert the Support CD into the DVD-ROM drive.
E. Go to Tools Easy RAID Installer
F. Follow instructions to finish the driver copy process.
STEP 3.2: Download driver from ASRock's website
A. Please download the “SATA Floppy Imaged driver” from ASRock's website and unzip the file into your USB flash
disk.
STEP 4: Windows installation
A. During Windows installation process, when Disk selection page show up, please click <Load Driver>.
B. Click <Browse> to find the driver inside your USB flash drive.