Installation guide

18
English
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these
headers and connectors. Placing jumper caps over the headers and connectors will cause
permanent damage to the motherboard.
2.6 Onboard Headers and Connectors
Serial ATA3 Connectors
(SATA_0: No. 32)
(SATA_1: No. 31)
(SATA3_M0: No. 8)
(SATA3_M1: No. 9)
(SATAIII_M0: No. 11)
(SATAIII_M1: No. 12)
(SATAIII_M2: No. 14)
(SATAIII_M3: No. 15)
ese eight Serial ATA3
(SATA3) connectors support
SATA data cables for internal
storage devices. e current
SATA3 interface allows up to
6.0 Gb/s data transfer rate.
Serial ATA2 Connectors
(SATA_2: No. 30)
(SATA_3: No. 29)
(SATA_4: No. 28)
(SATA_5: No. 27)
ese four Serial ATA2
(SATA2) connectors support
SATA data cables for internal
storage devices. e current
SATA2 interface allows up to
3.0 Gb/s data transfer rate.
USB 2.0 Header
(9-pin USB_2-3)
(No. 22)
DUMMY
GND
GND
+B
-B
USB_PWR
+A
-A
USB_PWR
1
Besides two default USB 2.0
ports on the I/O panel, there
is one USB 2.0 header on this
motherboard. Each USB 2.0
header can support two USB
2.0 ports.
*You can see p.6 or p.7 for motherboard layout.
SATA_0
SATA_1
SATA3_M0
SATA3_M1
SATAIII_M0
SATAIII_M1
SATAIII_M2
SATAIII_M3
SATA_2
SATA_3
SATA_4
SATA_5