Owner's Manual

4040
4040
40
DRAM tFAW
This controls the number of DRAM clocks for TFAW. Configuration options:
[Auto], [1] to [63].
DRAM Command Rate
Use this item to adjust DRAM Command Rate. Configuration
options : [1], [2] and [Auto].
VCCM(DRAM) Voltage
Use this to select VCCM(DRAM) Voltage. Configuration options: [Auto],
[1.350V] to [1.801V]. The default value is [Auto].
Would you like to save current setting user defaults?
In this option, you are allowed to load and save three user defaults
according to your own requirements.