Owner's Manual

3838
3838
38
BIOS SETUP UTILITY
Main
Advanced H/W Monitor Boot Security Exit
Overclocking may cause
damage to your CPU and
motherboard.
It should be done at
your own risk and
expense.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
OC Tweaker
OC Tweaker Settings
BCLK Frequency (MHz)
Overclock Mode
[133]
[Auto]
Boot Failure Guard
Spread Spectrum
Boot Failure Guard Count
CPU Ratio Setting
QPI Frequency
DRAM Frequency
[Enabled]
[3]
[Auto]
[Auto]
[Auto]
[Auto]
4.800GT
DDR3_1066
DRAM Timing Control
VCCM(DRAM) Voltage
[Auto]
Would you like to save current setting as
user defaults ?
Save 1st User Defaults [User Default 1]
7.37.3
7.37.3
7.3
OC TOC T
OC TOC T
OC T
weakweak
weakweak
weak
er Screener Screen
er Screener Screen
er Screen
In the OC Tweaker screen, you can set up overclocking features.
Overclock Mode
Use this to select Overclock Mode. Configuration options: [Auto], [Manual]
and [Optimized]. The default value is [Auto].
BCLK Frequency (MHz)
Use this option to adjust BCLK (Internal Base Clock) frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Boot Failure Guard Count
Enable or disable the feature of Boot Failure Guard Count.
Spread Spectrum
This item should always be [Auto] for better system stability.
CPU Ratio Setting
If the ratio status is unlocked, you will find this item appear to allow you
changing the ratio value of this motherboard.
QPI Frequency
Use this option to adjust QPI (QuickPath Interconnect) frequency. Configu-
ration options: [Auto], [3.200GT], [3.733GT], [4.266GT] and [4.800GT]. The
default value is [Auto].
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically. You may select
[Auto], [400MHz DDR3_800)] or [533MHz DDR3_1066)].