Version 1.0 Published October 2016 Copyright©2016 ASRock INC. All rights reserved. Copyright Notice: No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
AUSTRALIA ONLY Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel : +886-2-28965588 ext.
Fatal1ty Story Who knew that at age 19, I would be a World Champion PC gamer. When I was 13, I actually played competitive billiards in professional tournaments and won four or five games off guys who played at the highest level. I actually thought of making a career of it, but at that young age situations change rapidly. Because I’ve been blessed with great hand-eye coordination and a grasp of mathematics (an important element in video gaming) I gravitated to that activity.
LIVIN’ LARGE Since my first big tournament wins, I have been a “Professional Cyberathlete”, traveling the world and livin’ large with lots of International media coverage on outlets such as MTV, ESPN and a 60 Minutes segment on CBS to name only a few. It's unreal - it's crazy. I’m living a dream by playing video games for a living. I’ve always been athletic and took sports like hockey and football very seriously, working out and training hard.
Fatal1ty B250M Performance Series Motherboard Layout PS2 Mouse PS2 Keyboard CHA_FAN1 CPU_FAN1 CPU_FAN2 RGB_HEADER1 ATX12V1 1 ATXPWR1 SATA3_0 DDR4_B2 (64 bit, 288-pin module) USB3_5_6 SATA3_1 CHA_FAN2 PCIE1 CMOS Battery PCIE2 FATAL 1 TY CT4 CT3 CT2 M2_2 B250M Performance Ct1 RoHS PCIE4 LPT1 COM1 1 1 1 SPK_CI1 BIOS ROM HD_AUDIO1 1 TPMS1 USB3_4 1 USB5_6 PLED PWRBTN 1 1 1 1 HDLED RESET PANEL1 English PCIE3 Intel B250 Ultra M.
No. Description English 2 1 ATX 12V Power Connector (ATX12V1) 2 Chassis Fan Connector (CHA_FAN1) 3 CPU Fan Connector (CPU_FAN1) 4 CPU Fan Connector (CPU_FAN2) 5 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1) 6 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2) 7 AURA RGB LED Header (RGB_HEADER1) 8 ATX Power Connector (ATXPWR1) 9 USB 3.
Fatal1ty B250M Performance Series I/O Panel 1 2 14 13 3 12 10 11 9 7 8 4 5 6 No. Description No. Description 1 PS/2 Mouse Port 8 USB 2.0 Port (USB2) 2 D-Sub Port 9 USB 3.0 Ports (USB3_3_4) 3 LAN RJ-45 Port* 10 USB 3.0 Type-A Port (USB3_TA_1) 4 Line In (Light Blue)** 11 USB 3.0 Type-C Port (USB3_TC_1) 5 Front Speaker (Lime)** 12 HDMI Port 6 Microphone (Pink)** 13 DVI-D Port 7 Fatal1ty Mouse Port (USB1) 14 PS/2 Keyboard Port * There are two LEDs on the LAN port.
** To configure 7.1 CH HD Audio, it is required to use an HD front panel audio module and enable the multichannel audio feature through the audio driver. Please set Speaker Configuration to “7.1 Speaker”in the Realtek HD Audio Manager. Function of the Audio Ports in 7.
Fatal1ty B250M Performance Series Chapter 1 Introduction Thank you for purchasing ASRock Fatal1ty B250M Performance Series motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance. Because the motherboard specifications and the BIOS software might be updated, the content of this documentation will be subject to change without notice.
1.2 Specifications Platform • Micro ATX Form Factor CPU th th TM • Supports 7 and 6 Generation Intel® Core i7/i5/i3/ Pentium®/Celeron® Processors (Socket 1151) • Digi Power design • 6 Power Phase design • Supports Intel® Turbo Boost 2.0 Technology Chipset • Intel® B250 Memory • Dual Channel DDR4 Memory Technology • 4 x DDR4 DIMM Slots • Supports DDR4 2400/2133 non-ECC, un-buffered memory* * 7th Gen Intel® CPU supports DDR4 up to 2400; 6th Gen Intel® CPU supports DDR4 up to 2133.
Fatal1ty B250M Performance Series • HWAEncode/Decode: VP8, HEVC 8b, VP9, HEVC 10b (For 7th Gen Intel® CPU) • HWA Encode/Decode: VP8 , HEVC 8b; GPU/SWEncode/ Decode: VP9, HEVC 10b (For 6th Gen Intel® CPU) • Max. shared memory 1024MB * The size of maximum shared memory may vary from different operating systems. • Three graphics output options: D-Sub, DVI-D and HDMI • Supports Triple Monitor • Supports HDMI with max.
Rear Panel I/O • • • • • • • • • • • English 8 1 x PS/2 Mouse Port 1 x PS/2 Keyboard Port 1 x D-Sub Port 1 x DVI-D Port 1 x HDMI Port 1 x USB 2.0 Port (Supports ESD Protection (ASRock Full Spike Protection)) 1 x Fatal1ty Mouse Port (USB 2.0) (Supports ESD Protection (ASRock Full Spike Protection)) 3 x USB 3.0 Type-A Ports (Supports ESD Protection (ASRock Full Spike Protection)) 1 x USB 3.
Fatal1ty B250M Performance Series • 2 x Chassis Fan Connectors (4-pin) (Smart Fan Speed Control) * CHA_FAN1 and CHA_FAN2 can auto detect if 3-pin or 4-pin fan is in use. • 1 x 24 pin ATX Power Connector • 1 x 8 pin 12V Power Connector • 1 x Front Panel Audio Connector • 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD Protection (ASRock Full Spike Protection)) • 1 x USB 3.0 Header (Supports 2 USB 3.
Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
Fatal1ty B250M Performance Series Chapter 2 Installation This is a Micro ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. English • Make sure to unplug the power cord before installing or removing the motherboard components.
2.1 Installing the CPU 1. Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. 2. Unplug all power cables before installing the CPU.
Fatal1ty B250M Performance Series 4 3 English 5 13
Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.
Fatal1ty B250M Performance Series 2.
2.3 Installing Memory Modules (DIMM) This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology. 1. For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs. 2. It is unable to activate Dual Channel Memory Technology with only one or three memory module installed. 3.
Fatal1ty B250M Performance Series 1 2 English 3 17
2.4 Expansion Slots (PCI Express Slots) There are 4 PCI Express slots on the motherboard. Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation. PCIe slots: PCIE1 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards. PCIE2 (PCIe 3.
Fatal1ty B250M Performance Series 2.5 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header (9-pin PANEL1) (see p.1, No.
Chassis Intrusion and Speaker Header SPEAKER DUMMY DUMMY +5V (7-pin SPK_CI1) (see p.1, No. 18) Please connect the chassis intrusion and the chassis speaker to this header. 1 USB 2.0 Headers (9-pin USB3_4) (see p.1, No. 21) (9-pin USB5_6) (see p.1, No. 20) USB 3.0 Header (19-pin USB3_5_6) (see p.1, No. 9) SATA3_5 SATA3_3 SATA3_4 SATA3_2 Serial ATA3 Connectors (SATA3_0: see p.1, No. 10) (SATA3_1: see p.1, No. 11) (SATA3_2: see p.1, No. 13) (SATA3_3: see p.1, No. 14) (SATA3_4: see p.1, No.
Fatal1ty B250M Performance Series Front Panel Audio Header (9-pin HD_AUDIO1) (see p.1, No. 25) This header is for connecting audio devices to the front audio panel. GND PRESENCE# MIC_RET OUT_RET 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis manual to install your system. 2.
ATX Power Connector (24-pin ATXPWR1) 12 This motherboard provides a 24-pin ATX power 24 (see p.1, No. 8) 1 ATX 12V Power Connector (8-pin ATX12V1) (see p.1, No. 1) connector. To use a 20-pin ATX power supply, please plug it along Pin 1 and Pin 13. 13 8 5 4 1 This motherboard provides an 8-pin ATX 12V power connector. To use a 4-pin ATX power supply, please plug it along Pin 1 and Pin 5.
Fatal1ty B250M Performance Series AURA RGB LED header is used to connect RGB LED extension cable which allows users to choose from various LED lighting effects. English AURA RGB LED Header (4-pin RGB_HEADER1) (see p.1, No.
2.6 M.2_SSD (NGFF) Module Installation Guide The M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. The Ultra M.2 Socket (M2_1) supports type 2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s module and M.2 PCI Express module up to Gen3 x4 (32 Gb/s). The Ultra M.2 Socket (M2_2) supports type 2230/2242/2260/2280 M.2 PCI Express module up to Gen3 x4 (32 Gb/s). * Please be noted that if M2_1 is occupied by a SATA-type M.
Fatal1ty B250M Performance Series 5 Step 3 4 3 Move the standoff based on the module type and length. The standoff is placed at the nut location D by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standoff by hand. 2 1 E D C A B Step 4 E D C A B Peel off the yellow protective film on the nut to be used. Hand tighten the standoff into the desired nut location on the motherboard.
M.
Fatal1ty B250M Performance Series 1 Einleitung Vielen Dank, dass Sie sich für das Fatal1ty B250M Performance Series von ASRock entschieden haben – ein zuverlässiges Motherboard, das konsequent unter der strengen Qualitätskontrolle von ASRock hergestellt wurde. Es liefert ausgezeichnete Leistung mit robustem Design, das ASRock Streben nach Qualität und Beständigkeit erfüllt.
1.2 Technische Daten Plattform • Micro-ATX-Formfaktor Prozessor TM • Unterstützt Intel®-Core -i7/i5/i3/Pentium®/Celeron®-Prozessoren der 7. und 6. Generation (Sockeö 1151) • Digi Power design • 6-Leistungsphasendesign • Unterstützt Intel® Turbo Boost 2.0-Technologie Chipsatz • Intel® B250 Speicher • Dualkanal-DDR4-Speichertechnologie • 4 x DDR4-DIMM-Steckplätze • Unterstützt ungepufferten DDR4-2400/2133-Non-ECC-Speicher* * Intel®-Prozessor der 7.
Fatal1ty B250M Performance Series • HWA encodieren/decodieren: VP8, HEVC 8b; GPU/SW encodieren/decodieren: VP9, HEVC 10b (bei Intel®-Prozessor der 6. Generation) • Max. geteilter Speicher: 1024 MB * Die Größe des maximalen Freigabespeichers kann je nach Betriebssystem variieren.
Rückblende, E/A Speicher Deutsch 30 • 1 x PS/2-Mausanschluss • 1 x PS/2-Tastaturanschluss • 1 x D-Sub-Port • 1 x DVI-D-Port • 1 x HDMI-Port • 1 x USB 2.0-Port (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 1 x Fatal1ty-Mausport (USB 2.0) (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 3 x USB 3.0-Typ-A-Ports (unterstützt Schutz gegen elektrostatische Entladung (ASRock Full Spike Protection)) • 1 x USB 3.
Fatal1ty B250M Performance Series • 1 Druckerport-Anschlussleiste • 1 x COM-Anschluss-Stiftleiste • 1 x TPM-Stiftleiste • 1 x Gehäuseeingriff- und Lautsprecher-Stiftleiste • 2 x CPU-Lüfteranschlüsse (1 x 4-polig, 1 x 3-polig) * Der CPU-Lüfteranschluss unterstützt einen CPU-Lüfter mit einer maximalen Lüfterleistung von 1 A (12 W).
Betriebssystem Zertifizierungen • Microsoft® Windows® 10, 64 Bit (nur bei Intel®-Prozessor der 7. Generation) • Microsoft® Windows® 10, 64 Bit / 8.1, 64 Bit / 7, 32 Bit / 7, 64 Bit (nur bei Intel®-Prozessor der 6. Generation) * Zur Installation des Windows® 7-Betriebssystems wird ein modifiziertes Installationslaufwerk mit xHCI-Treibern in der ISO-Datei benötigt. Detaillierte Anweisungen finden Sie auf Seite 153.
Fatal1ty B250M Performance Series 1.3 Integrierte Stiftleisten und Anschlüsse Integrierte Stiftleisten und Anschlüsse sind KEINE Jumper. Bringen Sie KEINE JumperKappen an diesen Stiftleisten und Anschlüssen an. Durch Anbringen von JumperKappen an diesen Stiftleisten und Anschlüssen können Sie das Motherboard dauerhaft beschädigen. Systemblende-Stiftleiste (9-polig, PANEL1) (siehe S. 1, Nr.
Gehäuseeingriffs- und Lautsprecher-Stiftleiste (7-polig, SPK_CI1) (siehe S. 1, Nr. 18) SPEAKER DUMMY DUMMY +5V 1 Bitte verbinden Sie Gehäuseeingriffsvorrichtung und den Gehäuselautsprecher mit dieser Stiftleiste. USB 2.0-Stiftleisten (9-polig, USB3_4) (siehe S. 1, Nr. 21) (9-polig, USB5_6) (siehe S. 1, Nr. 20) Deutsch USB 3.0-Stiftleiste (19-polig, USB3_5_6) (siehe S. 1, Nr. 9) SATA3_5 SATA3_3 SATA3_4 SATA3_2 Serial-ATA-III-Anschlüsse (SATA3_0: siehe S. 1, Nr. 10) (SATA3_1: siehe S. 1, Nr.
Fatal1ty B250M Performance Series Audiostiftleiste (Frontblende) (9-polig, HD_AUDIO1) (siehe S. 1, Nr. 25) Diese Stiftleiste dient dem Anschließen von Audiogeräten an der Frontblende. GND PRESENCE# MIC_RET OUT_RET 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. High Definition Audio unterstützt Anschlusserkennung, der Draht am Gehäuse muss dazu jedoch HDA unterstützt. Bitte befolgen Sie zum Installieren Ihres Systems die Anweisungen in unserer Anleitung und der Anleitung zum Gehäuse. 2.
ATX-Netzanschluss (24-polig, ATXPWR1) (siehe S. 1, Nr. 8) ATX-12-V-Netzanschluss (8-polig, ATX12V1) (siehe S. 1, Nr. 1) 24 1 13 Dieses Motherboard bietet einen 24-poligen ATX-Netzanschluss. Bitte schließen Sie es zur Nutzung eines 20-poligen ATX-Netzteils entlang Kontakt 1 und Kontakt 13 an. 8 5 4 1 Dieses Motherboard bietet einen 8-poligen ATX-12V-Netzanschluss. Bitte schließen Sie es zur Nutzung eines 4-poligen ATXNetzteils entlang Kontakt 1 und Kontakt 5 an.
Fatal1ty B250M Performance Series AURA RGB-Stiftleiste dient dem Anschließen eines RGB-LEDErweiterungskabels, das dem Nutzer die Auswahl zwischen verschiedenen LED-Lichteffekten ermöglicht. Deutsch AURA RGB-LEDStiftleiste (4-polig, RGB_ HEADER1) (siehe S. 1, Nr.
1 Introduction Nous vous remercions d’avoir acheté cette carte mère ASRock Fatal1ty B250M Performance Series, une carte mère fiable fabriquée conformément au contrôle de qualité rigoureux et constant appliqué par ASRock. Fidèle à son engagement de qualité et de durabilité, ASRock vous garantit une carte mère de conception robuste aux performances élevées. Les spécifications de la carte mère et du logiciel BIOS pouvant être mises à jour, le contenu de ce document est soumis à modification sans préavis.
Fatal1ty B250M Performance Series Plateforme • Facteur de forme Micro ATX Processeur ème ème • Prend en charge les 7 et 6 Générations de processeurs Intel® TM Core i7/i5/i3/Pentium®/Celeron® (Socket 1151) • Digi Power design • Alimentation à 6 phases • Prend en charge la technologie Intel® Turbo Boost 2.
Graphiques • La technologie Intel® HD Graphics Built-in Visuals et les sorties VGA sont uniquement prises en charge par les processeurs intégrant un contrôleur graphique. • Prend en charge la technologie Intel® HD Graphics Built-in Visuals : Intel® Quick Sync Video avec AVC, MVC (S3D) et MPEG-2 Full HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD Technology, Intel® InsiderTM, Intel® HD Graphics • Gen9 LP, DX11.
Fatal1ty B250M Performance Series Gigabit LAN 10/100/1000 Mo/s Giga PHY Intel® I219V Prend en charge la fonction Wake-On-LAN Protection contre les orages/décharges électrostatiques (Protection complète contre les pics ASRock) • Prend en charge la fonction d’économie d’énergie Ethernet 802.
Connecteur Français 42 1 x embase pour port d’impression 1 x embase pour port COM 1 x embase TPM 1 x prise DEL d’alimentation et emplacement sur châssis 2 x connecteurs pour ventilateur de processeur (1 x 4 broches, 1 x 3 broches) * Le connecteur pour ventilateur de CPU prend en charge un ventilateur de CPU d'une puissance maximale de 1 A (12 W).
Fatal1ty B250M Performance Series Système d’exploitation Certifications ème • Microsoft® Windows® 10 64 bits (Pour la 7 Génération de CPU Intel®) • Microsoft® Windows® 10 64 bits / 8.1 64 bits / 7 32 bits / 7 64 bits (Pour la 6ème Génération de CPU Intel®) * Pour installer Windows® 7, un disque d'installation modifié avec les pilotes xHCI intégrés au fichier ISO est requis. Reportez-vous à la page 153 pour des instructions plus détaillées.
1.3 Embases et connecteurs de la carte mère Les embases et connecteurs situés sur la carte NE SONT PAS des cavaliers. Ne placez JAMAIS de capuchons de cavaliers sur ces embases ou connecteurs. Placer un capuchon de cavalier sur ces embases ou connecteurs endommagera irrémédiablement votre carte mère. Embase du panneau système (PANNEAU1 à 9 broches) (voir p.1, No.
Fatal1ty B250M Performance Series Prise DEL d’alimentation et emplacement sur châssis (SPK_CI1 7 à broches) (voir p.1, No. 18) SPEAKER DUMMY DUMMY +5V 1 Veuillez brancher l'emplacement sur le châssis et le haut-parleur du châssis sur ce connecteur. (USB5_6 à 9 broches) (voir p.1, No. 20) Embases USB 3.0 (USB3_5_6 à 19 broches) (voir p.1, No.
Embase audio du panneau frontal (HD_AUDIO1 à 9 broches) (voir p.1, No. 25) Cette embase sert au branchement des appareils audio au panneau audio frontal. GND PRESENCE# MIC_RET OUT_RET 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. L’audio haute définition prend en charge la technologie Jack Sensing (détection de la fiche), mais le panneau grillagé du châssis doit être compatible avec la HDA pour fonctionner correctement.
Fatal1ty B250M Performance Series 12 24 1 13 Cette carte mère est dotée d’un connecteur d’alimentation ATX à 24 broches. Pour utiliser une alimentation ATX à 20 broches, veuillez effectuer les branchements sur la Broche 1 et la Broche 13. (ATXPWR1 à 24 broches) (voir p.1, No. 8) Connecteur d’alimentation ATX 12V (ATX12V1 à 8 broches) (voir p.1, No. 1) 8 5 4 1 Cette carte mère est dotée d’un connecteur d’alimentation ATX 12V à 8 broches.
Embase LED RGB AURA (RGB_HEADER1 à 4 broches) (voir p.1, No. 7) Français 48 L'embase RGB sert à connecter le câble d'extension LED RVB qui permet aux utilisateurs de choisir parmi plusieurs effets lumineux LED.
Fatal1ty B250M Performance Series 1 Introduzione Congratulazioni per l’acquisto della scheda madre ASRock Fatal1ty B250M Performance Series, una scheda madre affidabile prodotta secondo i severissimi controlli di qualità ASRock. La scheda madre offre eccellenti prestazioni con un design robusto che si adatta all'impegno di ASRock di offrire sempre qualità e durata.
1.2 Specifiche Italiano 50 Piattaforma • Fattore di forma Micro ATX CPU th th TM • Supporta processori 7 and 6 Generation Intel® Core i7/i5/i3/ Pentium®/Celeron® (Socket 1151) • Digi Power design • Potenza a 6 fasi • Supporta la tecnologia Intel® Turbo Boost 2.
Grafica • La videografica integrata della scheda video HD Intel® e le uscite VGA possono essere supportate soltanto con processori con GPU integrata. • Supporta la videografica integrata della scheda video HD Intel®: Intel® Quick Sync Video con AVC, MVC (S3D) e MPEG-2 Full HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD Technology, Intel® InsiderTM, Intel® HD Graphics • Gen9 LP, DX11.
LAN • LAN Gigabit 10/100/1000 Mb/s • Giga PHY Intel® I219V • Supporto WOL (Wake-On-LAN) • Supporto protezione da fulmini/scariche elettrostatiche (ASRock Full Spike Protection) • Supporto Energy Efficient Ethernet 802.3az • Supporto PXE I/O pannello posteriore • • • • • • • • • • • Archiviazione Italiano 52 1 x porta mouse PS/2 1 x porta tastiera PS/2 1 x porta D-Sub 1 x porta DVI-D 1 x porta HDMI 1 x porta USB 2.
Fatal1ty B250M Performance Series • 1 x header porta stampa • 1 x connettore porta COM • 1 x connettore TMP • 1 x collegamento altoparlante e intrusione telaio • 2 x connettori ventola CPU (1 x 4 pin, 1 x 3 pin) * Il connettore ventola CPU supporta ventole CPU con potenza massima di 1A (12W). • 2 x connettori ventola telaio (4 pin) (Smart Fan Speed Control) * CHA_FAN1 e CHA_FAN2 sono in grado di rilevare se è in uso una ventola a 3 pin o 4 a pin.
th • Microsoft® Windows® 10 64-bit (per 7 Gen Intel® CPU) • Microsoft® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-bit (per 6th Gen Intel® CPU) * Per installare Windows® 7, è necessario un disco di installazione modificato con i driver xHCI integrati nel file ISO. Fare riferimento a pagina 153 per altre istruzioni dettagliate. * Per il driver aggiornato di Windows® 10, visitare il sito ASRock all’indirizzo: http://www.asrock.
Fatal1ty B250M Performance Series 1.3 Header e connettori sulla scheda Gli header e i connettori sulla scheda NON sono jumper. NON posizionare cappucci del jumper su questi header e connettori. Il posizionamento di cappucci del jumper su header e connettori provocherà danni permanenti alla scheda madre. Header sul pannello del sistema (PANEL1 a 9 pin) (vedere pag. 1, n.
Collegamento altoparlante e intrusione telaio (SPK_CI1 a 7 pin) (vedere pag. 1, n. 18) SPEAKER DUMMY DUMMY +5V Collegare l’intrusione telaio e l’altoparlante a questo collegamento. 1 Header USB 2.0 (9-pin USB3_4) (vedere pag. 1, n. 21) Italiano (9-pin USB5_6) (vedere pag. 1, n. 20) Header USB 3.0 (USB3_5_6 a 19 pin) (vedere pag. 1, n. 9) SATA3_5 SATA3_3 SATA3_4 SATA3_2 Connettori Serial ATA3 (SATA3_0: vedere pag. 1, n. 10) (SATA3_1: vedere pag. 1, n. 11) (SATA3_2: vedere pag.1, n.
Fatal1ty B250M Performance Series Header audio pannello anteriore (AUDIO1_HD a 9 pin) (vedere pag. 1, n. 25) Questo header serve a collegare i dispositivi audio al pannello audio anteriore. GND PRESENCE# MIC_RET OUT_RET 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. L'audio ad alta definizione supporta le funzioni Jack sensing, ma il filo del pannello sullo chassis deve supportare HDA per funzionare correttamente.
Connettore di alimentazione ATX (ATXPWR1 a 24 pin) (vedere pag. 1, n. 8) Connettore di alimentazione ATX da 12 V (ATX12V1 a 8 pin) (vedere pag. 1, n. 1) 12 24 1 13 Questa scheda madre è dotata di un connettore di alimentazione ATX a 24 pin. Per utilizzare un'alimentazione ATX a 20 pin, collegarla lungo il pin 1 e il pin 13. 8 5 4 1 Questa scheda madre è dotata di un connettore di alimentazione ATX da 12 V a 8 pin. Per utilizzare un'alimentazione ATX a 4 pin, collegarla lungo il pin 1 e il pin 5.
Fatal1ty B250M Performance Series Il collettore RGB AURA viene utilizzato per collegare la prolunga LED RGB, che consente agli utenti di scegliere tra vari effetti di illuminazione a LED. Italiano Collettore LED RGB AURA (RGB_HEADER1 a 4 pin) (vedere pag. 1, n.
1 Introducción Gracias por comprar la placa base ASRock Fatal1ty B250M Performance Series, una placa base fiable fabricada según el rigurosísimo control de calidad de ASRock. Ofrece un rendimiento excelente con un diseño resistente de acuerdo con el compromiso de calidad y resistencia de ASRock. Ya que las especificaciones de la placa base y el software del BIOS podrán ser actualizados, el contenido que aparece en esta documentación estará sujeto a modificaciones sin previo aviso.
Fatal1ty B250M Performance Series 1.2 Especificaciones Plataforma • Factor de forma Micro ATX CPU TM • Admite la familia de procesadores Intel® Core i7/i5/i3/Pentium®/ ª ª Celeron® (zócalo 1151) de la 7 y 6 generación • Digi Power design • Diseño de 6 fases de alimentación • Admite la tecnología Intel® Turbo Boost 2.
• Intel® HD Graphics Built-in Visuals y las salidas de VGA son compatibles únicamente con procesadores con GPU integrado. • Admite Intel® HD Graphics Built-in Visuals: Intel® Quick Sync Video con AVC, MVC (S3D) y MPEG-2 Full HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD Technology, Intel® InsiderTM, Intel® HD Graphics • Gen9 LP, DX11.
Fatal1ty B250M Performance Series LAN • Gigabit LAN 10/100/1000 Mb/s • Giga PHY Intel® I219V • Admite la función Reactivación de LAN • Admite protección contra rayos y ESD (protección total contra picos ASRock) • Admite Ethernet 802.3az de eficiencia energética • Admite PXE E/S en panel posterior • • • • • • • • • • • • 6 x Conectores SATA3 de 6,0 Gb/s, compatibilidad con NCQ, AHCI y conexión en caliente* * Si M2_1 se ocupa con un dispositivo M.
Conector Español 64 1 x Base de conexiones de puerto de impresión 1 x Base de conexiones de puerto COM 1 x Conector TPM 1 x Cabezal de intrusión de chasis y de altavoces 2 x Conectores para ventilador de la CPU (1 x 4 contactos, 1 x 3 contactos) * El conector para ventilador de la CPU admite ventilador de la CPU con una potencia de ventilador de 1 A (12 W) máxima.
Fatal1ty B250M Performance Series a • Microsoft® Windows® 10 64 bits (para CPU Intel® de la 7 ) • Microsoft® Windows® 10 64 bits / 8.1 64 bits / 7 32 bits / 7 64 bits (para CPU Intel® de la 6a generación) * Para instalar el sistema operativo Windows® 7, se necesita un disco de instalación modificado con los controladores xHCI empaquetados en el archivo ISO. Consulte la página 153 para obtener información más detallada.
1.3 Conectores y cabezales incorporados Los cabezales y conectores incorporados NO son puentes. NO coloque tapas de puente sobre estos cabezales y conectores. Si coloca tapas de puente sobre los cabezales y conectores dañará de forma permanente la placa base. Cabezal del panel del sistema (PANEL1 de 9 pines) (consulte la pág.1, n.
Fatal1ty B250M Performance Series Cabezal de intrusión de chasis y de altavoces (SPK_CI1 de 7 pines) (consulte la pág.1, nº 18) SPEAKER DUMMY DUMMY +5V Conecte la intrusión de chasis y el altavoz del chasis a este cabezal. 1 USB_PWR PP+ 1 (USB5_6 de 9 pines) (consulte la pág.1, nº 20) Cabezal USB 3.0 (USB3_5_6 de 19 pines) (consulte la pág.
Cabezal de audio del panel frontal (HD_AUDIO1 de 9 pines) (consulte la pág.1, nº 25) Este cabezal se utiliza para conectar dispositivos de audio al panel de audio frontal. GND PRESENCE# MIC_RET OUT_RET 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. El Audio de Alta Definición (HDA, en inglés) es compatible con el método de sensor de conectores, sin embargo, el cable del panel del chasis deberá ser compatible con HDA para que pueda funcionar correctamente.
Fatal1ty B250M Performance Series Conector de alimentación ATX de 12V (ATX12V1 de 8 pines) (consulte la pág.1, nº 1) 12 24 1 13 Esta placa base contiene un conector de alimentación ATX de 24 pines. Para utilizar una toma de alimentación ATX de 20 pines, conéctela en los Pines del 1 al 13. 8 5 4 1 Esta placa base contiene un conector de alimentación ATX de 12V y 8 pines. Para utilizar una toma de alimentación ATX de 4 pines, conéctela en los Pines del 1 al 5.
Cabezal de LED RGB AURA (RGB_HEADER1 de 4 pines) (consulte la pág.1, nº 7) Español 70 El cabezal RGB AURA se utiliza para conectar el alargador de LED RGB que permite a los usuarios elegir entre varios efectos de iluminación de LED.
Fatal1ty B250M Performance Series 1 Введение Благодарим вас за приобретение надежной материнской платы ASRock Fatal1ty B250M Performance Series, выпускаемой под постоянным строгим контролем компании ASRock. Эта материнская плата обеспечивает великолепную производительность и характеризуется прочной конструкцией в соответствии с требованиями компании ASRock в отношении качества и долговечности.
1.2. Технические характеристики Русский 72 Платформа • Форм-фактор Micro ATX ЦП TM • Поддерживаются процессоры Intel® Core 7/i5/i3/Pentium®/ Celeron® (разъем 1151) 7-го и 6-го поколений. • Digi Power design • Система питания 6 • Поддерживается технология Intel® Turbo Boost 2.
Графическая подсистема • Встроенный видеоадаптер Intel® HD Graphics и выходы VGA поддерживаются только при использовании ЦП со встроенными графическими процессорами. • Поддерживаемые встроенные технологии визуализации Intel® HD Graphics: Intel® Quick Sync Video с полностью аппаратным кодированием1 в форматах AVC, MVC (S3D) и MPEG-2, Intel® InTruTM 3D, технология Intel® Clear Video HD, Intel® InsiderTM, Intel® HD Graphics • Gen9 LP, DX11.
Gigabit Ethernet 10/100/1000 Мбит/с Giga PHY Intel® I219V Поддерживается пробуждение по ЛВС Молниезащита и защита от электростатических разрядов (ASRock Full Spike Protection) • Поддерживается Energy Efficient Ethernet 802.3az • Поддерживается PXE ЛВС • • • • Порты вводавывода на задней панели • • • • • • • • • • • Русский Запоминающие устройства 74 1 x порт PS/2 для мыши 1 x PS/2 для клавиатуры 1 x порт D-Sub 1 x порт DVI-D 1 x порт HDMI 1 x порты USB 2.
Fatal1ty B250M Performance Series 1 x колодка порта принтера 1 x колодка СОМ-порта 1 x колодка ТРМ 1 x колодка с разъемами датчика вскрытия корпуса и динамика • 2 x разъема для вентилятора ЦП (1 х 4-контактный, 1 х 3-контактный) * Разъем процессорного вентилятора поддерживает вентилятор с потребляемым током не более 1 А (12 Вт).
Операционные системы Сертификация • Microsoft® Windows® 10 64-разрядная (для ЦП Intel® 7-го поколения) • Microsoft® Windows® 10 64-разрядная / 8.1 64-разрядная/ 7 32-разрядная/ 7 64-разрядная (для ЦП Intel® 6-го поколения) * Для установки ОС Windows® 7 потребуется измененный установочный диск с драйверами xHCI, упакованными в файл ISO. Более подробные инструкции представлены на стр. 153. * Подробные сведения об обновлении драйвера для Windows® 10 представлены на веб-сайте ASRock: http://www.asrock.
Fatal1ty B250M Performance Series 1.3 Колодки и разъемы, расположенные на материнской плате Расположенные на материнской плате колодки и разъемы перемычками НЕ являются. НЕ устанавливайте на эти колодки и разъемы колпачковые перемычки. Установка колпачковых перемычек на эти колодки и разъемы может вызвать неустранимое повреждение материнской платы. Колодка системной панели (9-контактная, PANEL1) (См. стр.
Колодка с разъемами датчика вскрытия SPEAKER DUMMY DUMMY +5V корпуса и динамика (7-контактный SPK_CI1) (См. стр. 1, № 18) Русский Колодка USB 3.0 (19-контактная, USB3_5_6) (См. стр. 1, № 9) SATA3_5 SATA3_3 SATA3_1 SATA3_0 SIGNAL GND DUMMY Колодки USB 2.0 (9-контактная USB3_4) (См. стр. 1, № 21) (9-контактная USB5_6) (См. стр.
Fatal1ty B250M Performance Series Аудиоколодка передней панели (9-контактная, HD_ AUDIO1) (См. стр. 1, № 25) Эта колодка предназначена GND PRESENCE# MIC_RET OUT_RET для подключения аудиоустройств к передней аудиопанели. 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. Аудиосистема высокого разрешения поддерживает функцию распознавания разъема, но для е правильной работы необходимо, чтобы провод панели корпуса поддерживал передачу сигналов HDA. Инструкции по установке системы см.
Разъем питания АТХ (24-контактный, ATXPWR1) (См. стр. 1, № 8) Разъем питания АТХ 12 В (8-контактный, ATX 12 В 1) (См. стр. 1, № 1) 24 1 13 Эта материнская плата снабжена 24-контактным разъемом питания АТХ. Чтобы использовать 20-контактный разъем питания ATX, подключите его вдоль контакта 1 и контакта 13. 8 5 4 1 Эта материнская плата снабжена 8-контактным разъемом питания АТХ 12 В. Чтобы использовать 4-контактный разъем питания ATX, подключите его вдоль контакта 1 и контакта 5.
Fatal1ty B250M Performance Series Колодка RGBподсветки AURA служит для подключения удлинительного кабеля светодиодной RGBподсветки, которая позволяет реализовать различные световые эффекты. Русский Колодка светодиодной RGB-подсветки AURA (4-контактная, RGB_ HEADER1) (См. стр.
1 Introdução Obrigado por adquirir a placa mãe ASRock Fatal1ty B250M Performance Series, uma confiável placa mãe ASRock produzida sob rigoroso controle de qualidade consistente. Esta placa principal oferece um excelente desempenho com um design robusto em conformidade com o compromisso da ASRock em fabricar produtos de qualidade e resistentes. Como as especificações da placa-mãe e do software do BIOS podem ser atualizadas, o conteúdo desta documentação estará sujeito a alterações sem aviso prévio.
Fatal1ty B250M Performance Series Plataforma • Micro ATX Form Factor CPU ª ª TM • Suporta Processadores 7 e 6 Geração Intel® Core i7/i5/i3/ Pentium®/Celeron® (Soquete 1151) • Digi Power design • Design com 6 fases de alimentação • Suporta a tecnologia Intel® Turbo Boost 2.
• Os gráficos incorporados Intel® HD e as saídas VGA só podem ser suportados com processadores com GPU integrada. • Suporta gráficos incorporados Intel® HD: Intel® Quick Sync Video com AVC, MVC (S3D) e MPEG-2 Full HW Encode1, Intel® InTruTM 3D, Tecnologia Intel® Clear Video HD, Intel® InsiderTM, Gráficos Intel® HD • Gen9 LP, DX11.
Fatal1ty B250M Performance Series LAN • LAN Gigabit a 10/100/1000 Mb/s • Giga PHY Intel® I219V • Suporta Wake-On-LAN • Suporta Proteção contra Relâmpago/ESD (Proteção Total Contra Picos ASRock) • Suporta Energy Efficient Ethernet 802.3az • Suporta PXE E/S do painel posterior • • • • • • • • • • Armazenamento Português • 1 x Porta PS/2 para mouse 1 x Porta PS/2 para Teclado 1 x Porta D-Sub 1 x Porta DVI-D 1 x Porta HDMI 1 x Porta USB 2.
Conector AMI Legal UEFI BIOS com suporte multilingue GUI ACPI 6.0 compatível com eventos de despertar Suporte SMBIOS 2.7 CPU, GT_CPU, DRAM, PCH 1.
Fatal1ty B250M Performance Series Certificações • FCC, CE, WHQL, RCM, BSMI • Preparada para ErP/EuP (é necessária uma fonte de alimentação preparada para ErP/EuP) * Para obter informações detalhadas sobre o produto, por favor, visite o nosso site: http://www.asrock.com Português Por favor, observe que existe um certo risco envolvendo overclocking, incluindo o ajuste das definições na BIOS, a aplicação de tecnologia Untied Overclocking ou a utilização de ferramentas de overclocking de terceiros.
1.3 Suportes e conectores onboard Os conectores e suportes onboard NÃO são jumpers. NÃO coloque tampas de jumpers sobre estes terminais e conectores Colocar tampas de jumpers sobre os terminais e conectores irá causar danos permanentes à placa-mãe. Suporte do painel de sistema (PAINEL1 de 9 pinos) (ver p.1, N.
Fatal1ty B250M Performance Series Intrusão do Chassi e Cabeçote de Autofalante (SPK_CI1 de 7 pinos) (ver p.1, N.º 18) SPEAKER DUMMY DUMMY +5V Conecte a instrusão do chassi e autofalante do chassi a este cabeçote. 1 (USB5_6 9-pinos) (ver p.1, N.º 20) Suporte USB 3.0 (USB3_5_6 de 19 pinos) (ver p.1, N.º 9) USB_PWR PP+ 1 GND DUMMY Estes seis conectores SATA3 suportam cabos de dados SATA para dispositivos de armazenamento interno com uma taxa de transferência de dados de até 6,0 Gb/s.
Suporte de áudio do painel frontal (HD_AUDIO1 de 9 pinos) (ver p.1, N.º 25) Este suporte destina-se à conexão dos dispositivos de áudio no painel de áudio frontal. GND PRESENCE# MIC_RET OUT_RET 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. O Áudio de alta definição suporta Sensor de Adaptador, mas o fio do painel no chassi deverá suportar HDA para funcionar corretamente. Por favor, siga as instruções no nosso manual e no manual do chassi para instalar o seu sistema. 2.
Fatal1ty B250M Performance Series Conector de alimentação de 12V ATX (ATX12V1 de 8 pinos) (ver p.1, N.º 1) 12 24 1 13 Esta placa-mãe inclui um conector de alimentação ATX de 24 pinos. Para utilizar uma fonte de alimentação ATX de 20 pinos, introduza-a no Pino 1 e Pino 13. 8 5 4 1 Esta placa-mãe inclui um conector de alimentação de 12V ATX de 8 pinos. Para utilizar uma fonte de alimentação ATX de 4 pinos, introduza-a no Pino 1 e Pino 5.
Cabeçote de LED RGB AURA (RGB_HEADER1 de 4 pinos) (ver p.1, N.º 7) Português 92 Cabeçote RGB é usado para conectar o cabo de extensão de LED RGB que permite aos usuários escolher entre vários efeitos de iluminação LED.
Fatal1ty B250M Performance Series 1 Giriş ASRock'ın zorlu kalite kontrol süreçlerinden geçmiş olan ASRock Fatal1ty B250M Performance Series anakartını satın aldığınız için teşekkür ederiz. Sağlam tasarımı ile ASRock'ın kalite ve dayanıklılık taahhüdüne uygun şekilde mükemmel performans sağlar. Anakart özellikleri ve BIOS yazılımı güncellenebileceğinden, bu dokümantasyonun içeriği herhangi bir bildirimde bulunulmaksızın değiştirilebilir.
1.2 Özellikler Platform • Micro ATX Form Faktörü CPU TM • 7. ve 6. Nesil Intel® Core i7/i5/i3/Pentium®/Celeron® İşlemcileri destekler (Yuva 1151) • Digi Power design • 6 Güç Safhası tasarımı • Intel® Turbo Boost 2.0 Teknolojisini destekler Yonga kümesi • Intel® B250 • Çift Kanallı DDR4 Bellek Teknolojisi • 4 x DDR4 DIMM Yuvası • DDR4 2400/2133 ECC olmayan, arabelleksiz bellek destekler* * 7. Nesil Intel® işlemci 2400'e kadar DDR4 destekler; 6. Nesil Intel® işlemci 2133'e kadar DDR4 destekler.
Fatal1ty B250M Performance Series Grafikler • Intel® HD Graphics Dahili Görselleri ile VGA çıktıları, yalnızca GPU entegre edilmiş işlemciler ile desteklenir. Ses Türkçe • Intel® HD Graphics Dahili Görsellerini destekler: AVC, MVC (S3D) ve MPEG-2 Full HW Encode1, Intel® InTruTM 3D, Intel® Net Video HD Teknolojisi, Intel® InsiderTM, Intel® HD Graphics ile Intel® Quick Sync Video • Gen9 LP, DX11.3, DX12 • HWA Kodlama/Kod Çözme: VP8, HEVC 8b, VP9, HEVC 10b (7.
Gigabit LAN 10/100/1000 Mb/s Giga PHY Intel® I219V Yerel Ağ Üzerinden Açmayı destekler Yıldırım/ESD Koruması destekler (ASRock Tam Ani Gerilim Koruması) • Enerji Verimliliğine Sahip Ethernet 802.3az işlevini destekler • PXE özelliğini destekler LAN • • • • Arka Panel I/O • • • • • • • • Türkçe • • • Depolama 96 1 x PS/2 Fare Bağlantı Noktası 1 x PS/2 Klavye Bağlantı Noktası 1 x D-Sub Bağlantı Noktası 1 x DVI-D Bağlantı Noktası 1 x HDMI Bağlantı Noktası 1 x Bağlayıcısı USB 2.
Fatal1ty B250M Performance Series • 1 x Yazdırma Bağlantı Noktası Bağlantısı • 1 x tane COM Bağlantı Noktası Bağlantısı • 1 x tane TPM Bağlantısı • 1 x Kasa Yetkisiz Erişim ve Hoparlör Bağlantısı • 2 x İşlemci Fan Bağlayıcıları (1 x 4 pimli, 1 x 3 pimli) * İşlemci Fan Bağlayıcı, en fazla 1 A (12 W) fan gücünde işlemci fanı destekler.
Belgeler • FCC, CE, WHQL, RCM, BSMI • ErP/EuP için hazır (ErP/EuP için hazır güç beslemesi gereklidir) * Detaylı ürün bilgisi için, lütfen web sitemizi ziyaret edin: http://www.asrock.com Lütfen, BIOS ayarlarını düzenleme, Bağımsız Hız Aşırtma Teknolojinin uygulanması ya da üçüncü kişilerin hız aşırtma araçlarının kullanılması da dahil olmak üzere tüm hız aşırtma işlemlerinin belirli bir risk taşıdığını unutmayın.
Fatal1ty B250M Performance Series 1.3 Ekli Bağlantılar ve Bağlayıcılar Ekli bağlantılar ve bağlayıcılar bağlantı teli değildir. Bağlantı teli kapaklarını bu bağlantı ve bağlayıcılar üzerine yerleştirmeyin. Bağlantı teli kapaklarının bağlantılar ile bağlayıcılar üzerine yerleştirilmesi, anakarta kalıcı hasar verebilir. Sistem Paneli Bağlantısı (9-pin PANEL1) (bkz sf.1, No.
Kasa Yetkisiz Erişim ve Hoparlör Bağlantısı (7-pin SPK_CI1) (bkz. s.1, No. 18) SPEAKER DUMMY DUMMY +5V Lütfen kasa yetkisiz erişim ve kasa hoparlörünü bu bağlantıya takın. 1 USB 2.0 Bağlantıları (9-pin USB3_4) (bkz. s.1, No. 21) (9 pimli USB5_6) (bkz. s.1, No. 20) USB 3.0 Bağlantı (19-pin USB3_5_6) (bkz. s.1, No. 9) SATA3_5 SATA3_3 SATA3_4 SATA3_2 Türkçe Seri ATA3 Bağlayıcıları (SATA3_0: bkz. sf.1, No. 10) (SATA3_1: bkz. sf.1, No. 11) (SATA3_2: bkz. sf.1, No. 13) (SATA3_3: bkz. sf.1, No.
Fatal1ty B250M Performance Series Ön Panel Ses Bağlantısı (9-pin HD_AUDIO1) (bkz. s.1, No. 25) Bu bağlantı, ses aygıtlarının ön ses paneline bağlanması içindir. GND PRESENCE# MIC_RET OUT_RET 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L Türkçe 1. Yüksek Tanımlı Ses, Jak Algılama özelliğini destekler, ancak bu işlevin düzgün çalışabilmesi için kasa üzerindeki panel kablosunun HDA işlevini desteklemesi gerekmektedir.
ATX Güç Bağlayıcısı (24-pin ATXPWR1) (bkz. s.1, No. 8) ATX 12V Güç Bağlayıcısı (8-pin ATX12V1) (bkz. s.1, No. 1) 12 24 1 13 Bu anakart, 24-pin ATX güç bağlayıcısı sağlamaktadır. 20-pin ATX güç beslemesi kullanmak için, lütfen Pin 1 ve Pin 13'e bağlayın. 8 5 4 1 Bu anakart, 8-pin ATX 12V güç bağlayıcısı sağlamaktadır. 4-pin ATX güç beslemesi kullanmak için, lütfen Pin 1 ve Pin 5'e bağlayın.
Fatal1ty B250M Performance Series AURA RGB bağlantısı, kullanıcıların çeşitli LED aydınlatma efektleri arasında seçim yapmasına izin veren RGB LED uzatma kablosunu bağlamak için kullanılır. Türkçe AURA RGB LED Bağlantısı (4-pin RGB_HEADER1) (bkz. s.1, No.
1 개요 ASRock Fatal1ty B250M Performance Series 마더보드를 구입해 주셔서 감사합니 다 . 이 마더보드는 ASRock 의 일관되고 엄격한 품질관리 하에 생산되어 신뢰성 이 우수합니다 . 품질과 내구성에 대한 ASRock 의 기준에 부합하는 우수한 성능 과 견고한 설계를 제공합니다 . 마더보드 규격과 BIOS 소프트웨어를 업데이트할 수도 있기 때문에 , 이 문서의 내용은 예고 없이 변경될 수 있습니다 . 이 설명서가 변경될 경우 , 업데이트된 버 전은 ASRock 의 웹사이트에서 추가 통지 없이 제공됩니다 . 이 마더보드와 관련 하여 기술적 지원이 필요한 경우 , 당사의 웹사이트를 방문하여 사용 중인 모델 에 대한 구체적 정보를 구하십시오 . ASRock 의 웹사이트에서는 최신 VGA 카드 와 CPU 지원 목록도 찾을 수 있습니다 . ASRock 웹사이트 http://www.asrock.com. 한국어 1.
Fatal1ty B250M Performance Series 1.2 규격 플랫폼 • Micro ATX 폼 팩터 CPU • 7 세대 및 6 세대 Intel® CoreTM i7/i5/i3/Pentium®/Celeron® 프 로세서 ( 소켓 1151) 지원 • Digi Power design • 6 개 전원 위상 구조 • Intel® Turbo Boost 2.0 기술 지원 • Intel® B250 메모리 • 듀얼 채널 DDR4 메모리 기술 • DDR4 DIMM 슬롯 4 개 • DDR4 2400/2133 비 -ECC, 비버퍼링 메모리 지원 * * 7 세대 Intel® CPU 는 최대 2400 까지 DDR4 를 지원하고 , 6 세 대 Intel® CPU 는 2133 까지 DDR4 를 지원합니다 . • ECC UDIMM 메모리 모듈 ( 비 ECC 모드에서 작동함 ) 지 원 • 시스템 메모리 최대 용량 : 64GB • Intel® Extreme Memory Profile (XMP) 2.
• Intel® HD 그래픽스 빌트 - 인 비주얼과 VGA 출력은 GPU 통합 프로세서로만 지원할 수 있습니다 . • Intel® HD 그래픽스 빌트 - 인 비주얼 지원 : AVC, MVC (S3D) 및 MPEG-2 풀 HW Encode1 지원 Intel® Quick Sync Video, Intel® InTruTM 3D, Intel® 클리어 비디오 HD 기술 , Intel® InsiderTM, Intel® HD 그래픽스 • Gen9 LP, DX11.3, DX12 • HWA 인코드 / 디코드 : VP8, HEVC 8b, VP9, HEVC 10b (7 세대 Intel® CPU 의 경우 ) • HWA 인코드 / 디코드 : VP8 , HEVC 8b; GPU/SW 인코드 / 디코드 : VP9, HEVC 10b(6 세대 Intel® CPU 의 경우 ) • 최대 공유 메모리 1,024MB * 최대 공유 메모리 크기는 운영 체제에 따라 다를 수 있습니 다.
LAN • • • • • • Gigabit LAN 10/100/1000 Mb/s Giga PHY Intel® I219V Wake-On-LAN 지원 번개 /ESD 보호 지원 (ASRock 풀 스파이크 보호 ) 절전형 이더넷 802.3az 지원 PXE 지원 후면 패널 I/O • • • • • • PS/2 마우스 포트 1 개 PS/2 키보드 포트 1 개 D-Sub 포트 1 개 DVI-D 포트 1 개 HDMI 포트 1 개 USB 2.0 포트 1 개 (ESD 보호 지원 (ASRock 풀 스파이크 보호 )) Fatal1ty 마우스 포트 1 개 (USB 2.0) (ESD 보호 지원 (ASRock 풀 스파이크 보호 )) USB 3.0 타입 A 포트 3 개 (ESD 보호 지원 (ASRock 풀 스파 이크 보호 )) USB 3.
커넥터 한국어 108 • 인쇄 포트 헤더 1 개 • COM 포트 헤더 1 개 • TPM 헤더 1 개 • 섀시 침입 및 스피커 헤더 1 개 • CPU 팬 커넥터 2 개 (4 핀 1 개 , 3 핀 1 개 ) * CPU 팬 커넥터는 팬 전력이 최대 1A(12W) 인 CPU 팬을 지원 합니다 . • 섀시 팬 커넥터 (4 핀 ) 2 개 ( 스마트 팬 속도 제어 ) * 3 핀 또는 4 핀 팬이 사용 중인 경우 , CHA_FAN1 과 CHA_ FAN2 가 자동으로 감지할 수 있습니다 . • 24 핀 ATX 전원 커넥터 1 개 • 8 핀 12V 전원 커넥터 1 개 • 전면 패널 오디오 커넥터 1 개 • USB 2.0 헤더 2 개 (USB 2.0 포트 4 개 지원 ) (ESD 보호 지원 (ASRock 풀 스파이크 보호 )) • USB 3.0 헤더 1 개 (USB 3.
Fatal1ty B250M Performance Series OS 인증 • Microsoft® Windows® 10 64 비트 (7 세대 Intel® CPU 의 경우 ) • Microsoft® Windows® 10 64 비트 /8.1 64 비트 /7 32 비트 /7 64 비트 (6 세대 Intel® CPU 의 경우 ) * Windows® 7 OS 를 설치하려면 , xHCI 드라이버를 ISO 파일에 포함시킨 수정된 설치 디스크가 필요합니다 . 자세한 사용법 은 153 페이지를 참조하십시오 . * 업데이트된 Windows® 10 드라이브의 자세한 내용은 다음의 ASRock 웹사이트를 참조하십시오 . http://www.asrock.com • FCC, CE, WHQL, RCM, BSMI • ErP/EuP 사용 가능 (ErP/EuP 사용 가능 전원공급장치 필요 ) 한국어 * 자세한 제품 정보에 대해서는 당사 웹사이트를 참조하십시오 : http://www.asrock.
1.3 온보드 헤더 및 커넥터 온보드 헤더와 커넥터는 점퍼가 아닙니다 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우지 마십시오 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우면 마더보드가 영구 적으로 손상됩니다 . 시스템 패널 헤더 (9 핀 PANEL1) (1 페이지 , 19 번 항목 참조 ) PLED+ PLEDPWRBTN# GND 1 GND RESET# GND HDLEDHDLED+ 섀시의 전원 스위치 , 리 셋 스위치 , 시스템 상태 표시등을 아래의 핀 할당 에 따라 이 헤더에 연결 합니다 . 케이블을 연결 하기 전에 양극 핀과 음 극 핀을 기록합니다 . 한국어 PWRBTN( 전원 스위치 ): 섀시 전면 패널의 전원 스위치에 연결합니다 . 전원 스위치를 이용해 시스템을 끄는 방법을 구성할 수 있습니다 . RESET( 리셋 스위치 ): 섀시 전면 패널의 리셋 스위치에 연결합니다 . 컴퓨터가 정지하고 정상적 재시 작을 수행하지 못할 경우 리셋 스위치를 눌러 컴퓨터를 재시작합니다 .
Fatal1ty B250M Performance Series 섀시 침입 및 스피커 헤더 (7 핀 SPK_CI1) SPEAKER DUMMY DUMMY +5V (1 페이지 , 18 번 항목 참조 ) 섀시 침입 및 섀시 스피 커를 이 헤더에 연결하십 시오 . 1 SIGNAL GND DUMMY USB 2.0 헤더 (9 핀 USB3_4) (1 페이지 , 21 번 항목 참조 ) (9 핀 USB5_6) (1 페이지 , 20 번 항목 참조 ) USB 3.0 헤더 (19 핀 USB3_5_6) (1 페이지 , 9 번 항목 참조 ) USB_PWR PP+ 1 GND DUMMY 이들 6 개의 SATA3 커넥 터는 최대 6.0 Gb/s 데이 터 전송 속도를 제공하는 내부 저장 장치용 SATA 데이터 케이블을 지원합 니다 . SATA- 타입 M.2 장치에 서 M2_1 을 사용 중이면 , SATA3_0 이 비활성화됩 니다 .
전면 패널 오디오 헤더 (9 핀 HD_AUDIO1) 이 헤더는 오디오 장치를 전면 오디오 패널에 연결 GND PRESENCE# MIC_RET OUT_RET (1 페이지 , 25 번 항목 참조 ) 하는 데 사용됩니다 . 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 한국어 111 고음질 오디오는 잭 감지를 지원하지만 올바르게 작동하려면 섀시의 패널 와 이어가 HDA 를 지원해야 합니다 . 설명서 및 섀시 설명서에 나와 있는 지침을 따라 시스템을 설치하십시오 . 222 AC’97 오디오 패널을 사용할 경우 아래와 같은 절차를 따라 전면 패널 오디오 헤더에 설치하십시오 : A. Mic_IN (MIC) 를 MIC2_L 에 연결합니다 . B. Audio_R (RIN) 을 OUT2_R 에 연결하고 Audio_L (LIN) 을 OUT2_L 에 연결 합니다 . C. 접지 (GND) 를 접지 (GND) 에 연결합니다 . D.
Fatal1ty B250M Performance Series 12 이 마더보드에는 24 핀 ATX 전원 커넥터가 탑 24 (1 페이지 , 8 번 항목 참조 ) 1 ATX 12V 전원 커넥터 (8 핀 ATX12V1) (1 페이지 , 1 번 항목 참조 ) 재되어 있습니다 . 20 핀 ATX 전원공급장치를 사 용하려면 핀 1 과 핀 13 을 따라 연결하십시오 . 13 8 5 4 1 이 마더보드에는 8 핀 ATX 12V 전원 커넥터가 탑재되어 있습니다 . 4 핀 ATX 전원공급장치를 사 용하려면 핀 1 과 핀 5 을 따라 연결하십시오 .
한국어 114 AURA RGB LED 헤더 (4 핀 RGB_HEADER1) AURA RGB 헤더는 다양 한 LED 조명 효과를 선택 (1 페이지 , 7 번 항목 참조 ) 할 수 있는 RGB LED 연 장 케이블을 연결하는 데 사용됩니다 .
Fatal1ty B250M Performance Series 1 はじめに ASRock ASRock Fatal1ty B250M Performance Series ASRock BIOS ASRock ASRock VGA CPU http://www.asrock.com. 日本語 ASRock 1.1 パッケージの内容 • ASRock Fatal1ty B250M Performance Series • • • • • ASRock Fatal1ty B250M Performance Series ASRock Fatal1ty B250M Performance Series 2x ATA SATA 2 x M.
1.2 仕様 プラット フォーム • ATX CPU • 7 6 I Celeron® • Digi Power design ntel® CoreTM i7/i5/i3/Pentium®/ 1151 • 6 • Intel® チップセット 日本語 メモリ • Intel® B250 • D DR4 • 4 x DDR4 DIMM • DDR4 2400/2133 ECC * 7 I ntel® CPU 2400 6 I ntel® CPU 2133 • ECC UDIMM • • Intel® • DIMM 拡張スロット 116 2.0 * DDR4 DDR4 non-ECC 64GB XMP 2.0 15 • 2 x PCI Express 3.0 x16 PCIE1: 16 4 * * NVMe SSD • 2 x PCI Express 3.
Fatal1ty B250M Performance Series グラフィッ クス • Intel®HD GPU • Intel®HD MVC (S3D) Intel® HD VGA AVC MP EG-2 Full HW Encode1 Intel® InTruTM 3D, Intel® Intel® InsiderTM, Intel® HD 日本語 • Gen9 LP DX11.
LAN • LAN 10/100/1000 Mb/s • P HY Intel® I219V • Wake-On-LAN • / ESD ASRock • • PXE リアパネル I/O 日本語 • • • • • • 1 x PS/2 1 x PS/2 1 x D-Sub 1 x DVI-D 1 x HDMI 1 x USB 2.0 802.3az ESD ASRock • 1 x Fatal1ty USB 2.0 ESD ASRock • 3 x USB 3.0 Type-A ESD ASRock • 1 x USB 3.0 Type-C ESD ASRock • LED 1 x RJ-45 LAN ACT/LINK LED SPEED LED • HD : / / ストレージ 118 • 6 x SATA3 6.0 Gb/s NCQ AHCI * * SATA M.2 M2_1 SATA3_0 • 1x M.2 (M2_1) 2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s G en3 x4 (32 Gb/s) M.
Fatal1ty B250M Performance Series • 1x • 1 x COM • 1 x TPM • 1x • 2 x CPU * CPU • 2x * CPU_FAN1 • • • • 1x4 1A (12W 4 CH A_FAN2 1 x 24 ATX 1x8 12V 1x 2 x USB 2.0 ESD • 1 x USB 3.0 ESD BIOS 機能 • • • • ハードウェア モニター • CPU/ • CPU / • CPU/ 3 CPU 4 4 USB 2.0 ASRock 2 USB 3.0 ASRock AMI UEFI Legal BIOS GUI ACPI 6.0 SMBIOS 2.7 CPU GT_CPU DRAM PCH 1.0V VCCIO VCCSA VCCST • CPU/ • • OS 1x3 ) 日本語 コネクタ CPU : +12V +5V +3.3V CPU Vcore DRAM PCH 1.
• FCC CE WHQL RCM BSMI • ErP/EuP Ready ErP/EuP 認証 * http://www.asrock.
Fatal1ty B250M Performance Series 1.3 オンボードのヘッダーとコネクター PLED+ PLEDPWRBTN# GND 1 1 GND RESET# GND HDLEDHDLED+ 日本語 9 p.1 No.
SPEAKER DUMMY DUMMY +5V 7 SPK_CI1 p.1 No. 18 1 USB 2.0 9 USB3_4 p.1 No. 21 9 USB5_6 p.1 No. 20 USB 3.0 19 USB3_5_6 p.1 No. 9 SATA3_5 SATA3_3 SATA3_4 SATA3_2 日本語 ATA3 (SATA3_0: p.1 No. 10 (SATA3_1: p.1 No. 11 (SATA3_2: p.1 No. 13 (SATA3_3: p.1 No. 14 (SATA3_4: p.1 No. 16 (SATA3_5: p.1 No. 15 SATA3_1 SATA3_0 SIGNAL GND DUMMY USB_PWR PP+ 1 SATA3 6.0 Gb/ SATA SATA M.2 M2_1 SATA3_0 2 GND DUMMY USB 2.
Fatal1ty B250M Performance Series GND PRESENCE# MIC_RET OUT_RET 9 HD_AUDIO1 p.1 No. 25 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 111 HDA A. Mic_IN (MIC) MIC2_L B. Audio_R (RIN) OUT2_R Audio_L (LIN) C. (GND) (GND) D. MIC_RET OUT_RET HD E. 4 CHA_FAN1 p.1 No. 2 4 CHA_FAN2 p.1 No. 12 CPU 4 CPU_FAN1 p.1 No.
ATX 24 ATXPWR1 p.1 No. 8 12 24 24 ATX 20 1 1 ATX 12V 8 ATX12V1 p.1 No. 1 ATX 13 13 8 8 5 ATX12V 4 1 4 ATX 1 5 日本語 COM1 P CICL K FRAM E LAD3 P CIRST # LAD0 TPM AFD# ERROR# PINIT# SLIN# SMB_CLK_MAIN LAD2 SMB_DATA_MAIN GN D LAD1 GND SERIRQ # S_PWRDWN # 1 GN D 25 LPT1 p.1 No. 23 +3 V GN D TPM 17 TPMS1 p.1 No. 22 +3VS B 9 COM1 p.1 No.
Fatal1ty B250M Performance Series AURA RGB RGB LED LED 日本語 AURA RGB LED 4 RGB_HEADER1 p.1 No.
1 简介 感谢您购买华擎 Fatal1ty B250M Performance Series 主板,这是按照华擎 一贯严 格质量控制标准生产的性能可靠的主板。它提供符合华擎质量和耐久性承诺的 精良设计和卓越性能。 �简体中文 由于主板规格和 BIOS 软件可能已更新,因此,本文档的内容可能会随时更改, 恕不另行通知。如果本文档有任何修改,则更新的版本将发布在华擎网站上, 我们不会另外进行通知。如果您需要与此主板相关的技术支持,请访问我们的 网站以具体了解所用型号的信息。您也可以在华擎网站上找到最新 VGA 卡和 CPU 支持列表。华擎网站 http://www.asrock.com。 1.1 包装清单 • • • • • • 126 华擎 Fatal1ty B250M Performance Series 主板(Micro ATX 规格尺寸) 华擎 Fatal1ty B250M Performance Series 快速安装指南 华擎 Fatal1ty B250M Performance Series 支持光盘 2 x 串行 ATA (SATA) 数据线(选购) 2 x 螺丝(供 M.
Fatal1ty B250M Performance Series 1.2 规格 平台 • Micro ATX 规格尺寸 CPU • 支持第 7 代和第 6 代 Intel® CoreTM i7/i5/i3/Pentium®/Celeron® 处理器 (Socket 1151) • Digi Power design 芯片集 �简体中文 • 6 电源相设计 • 支持 Intel® Turbo Boost 2.0 技术 • Intel® B250 内存 • 双通道 DDR4 内存技术 • 4 x DDR4 DIMM 槽 • 支持 DDR4 2400/2133 非 ECC,非缓冲内存 * * 第 7 代 Intel® CPU 支持 DDR4 最高达 2400,第 6 代 Intel® CPU 支持 DDR4 最高达 2133。 • 支持 ECC UDIMM 内存模块(非 ECC 模式操作) • 支持系统内存最大容量: 64GB • 支持 Intel® Extreme Memory Profile (XMP) 2.
• 只有 GPU 集成的处理器才支持 Intel® HD Graphics 内置视 效和 VGA 输出。 • 支持 Intel® HD Graphics 内置视效 : Intel® 快速同步视频,采 用 AVC、MVC (S3D) 和 MPEG-2 Full HW Encode1、Intel® InTruTM 3D、Intel® Clear Video HD 技术、Intel® InsiderTM、 Intel® HD Graphics • Gen9 LP, DX11.
Fatal1ty B250M Performance Series • • • • • • • • • • • 1 x PS/2 鼠标端口 1 x PS/2 键盘端口 1 x D-Sub 端口 1 x DVI-D 端口 1 x HDMI 端口 1 x USB 2.0 端口(支持 ESD 保护,即华擎全防护) 1 x Fatal1ty 鼠标端口(USB 2.0,支持 ESD 保护,即华擎全 防护) 3 x USB 3.0 类型 A 端口(支持 ESD 保护,即华擎全防护) 1 x USB 3.0 类型 C 端口(支持 ESD 保护,即华擎全防护) 1 x RJ-45 LAN 端口,带 LED(ACT/LINK LED 和 SPEED LED) 高清音频插孔 : 线路输入 / 前扬声器 / 麦克风 存储 • 6 x SATA3 6.0 Gb/s 接口,支持 NCQ、AHCI 和热插 拔 * * 如果 M2_1 被 SATA 型 M.2 设备占用,SATA3_0 将被禁用。 • 1 x 超级 M.2 接口 (M2_1),支持 2230/2242/2260/2280 M.2 SATA3 6.
• 2 x USB 2.0 接脚(支持 4 个 USB 2.0 端口,支持 ESD 保护, 即华擎全防护) • 1 x USB 3.0 接脚(支持 2 个 USB 3.0 端口,支持 ESD 保护, 即华擎全防护) �简体中文 BIOS 功能 特点 • • • • 硬件监控 • CPU/ 机箱温度感测 • CPU/ 机箱风扇转速计 • CPU/ 机箱静音风扇(根据 CPU 温度自动调整机箱风扇速 度) • CPU/ 机箱风扇多种速度控制 • CASE OPEN(机箱打开)检测 • 电压监控: +12V、+5V、+3.3V、CPU Vcore、DRAM、 PCH 1.0V 操作系统 • Microsoft® Windows® 10 64-bit ( 适用于第 7 代 Intel® CPU) • Microsoft® Windows® 10 64-bit / 8.
Fatal1ty B250M Performance Series �简体中文 须认识到超频会有一定风险,包括调整 BIOS 设置,应用“自由超频技术”, 或使用第三方超频工具。超频可能会影响到系统的稳定性,甚至对系统的组件 和设备造成损坏。执行这项工作您应自担风险和自己承担费用。我们对由于超 频而造成的损坏概不负责。 131
1.
Fatal1ty B250M Performance Series 机箱侵入和扬声器接脚 (7 针 SPK_CI1) SPEAKER DUMMY DUMMY +5V (见第 1 页,第 18 个) 请将机箱侵入和机箱扬 声器连接到到此接脚。 1 USB 2.0 接脚 (9- 针 USB3_4) (见第 1 页,第 21 个) (9- 针 USB5_6) (见第 1 页,第 20 个) USB 3.0 接脚 (19 针 USB3_5_6) (见第 1 页,第 9 个) USB_PWR PP+ 1 �简体中文 这六个 SATA3 接口支持 最高 6.0 Gb/s 数据传输 速率的内部存储设备的 SATA 数据线。 如果 M2_1 被 SATA 型 M.
前面板音频接脚 (9 针 HD_AUDIO1) (见第 1 页,第 25 个) 此接脚用于将音频设备 连接到前音频面板。 GND PRESENCE# MIC_RET OUT_RET 1 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L �简体中文 111 高清音频支持插孔感测,但机箱上的面板连线必须支持 HDA 才能正常工作。 请按照我们的手册和机箱手册的说明安装系统。 222 如果您使用 AC’97 音频面板,请按照以下步骤将它安装到前面板音频接脚: A. 将 Mic_IN (MIC) 连接到 MIC2_L。 B. 将 Audio_R (RIN) 连接到 OUT2_R,将 Audio_L (LIN) 连接到 OUT2_L。 C. 将接地端 (GND) 连接到接地端 (GND)。 D. MIC_RET 和 OUT_RET 只用于高清音频面板。您不需要针对 AC’97 音频 面板连接它们。 E.
Fatal1ty B250M Performance Series ATX 12V 电源接口 (8 针 ATX12V1) (见第 1 页,第 1 个) 12 24 1 13 此主板提供 24 针 ATX 电源接口。要使用 20 针 ATX 电源,请沿针脚 1 和针脚 13 插接它。 8 5 4 1 此主板提供 8 针 ATX 12V 电源接口。要使用 4 针 ATX 电源,请沿针脚 1 和针脚 5 插接它。 P CICL K FRAM E LAD3 LAD0 P CIRST # 此接口支持 Trusted Platform Module(信任平台模块, TPM)系统,可以安全地存储 密钥、数字证书、密码和数据。 TPM 系统也可以帮助增强网络 安全,保护数字身份和确保平 台完整性。 +3 V TPM 接脚 (17 针 TPMS1) (见第 1 页,第 22 个) GN D 此 COM1 接脚支持串行 端口模块。 +3VS B 串行端口接脚 (9 针 COM1) (见第 1 页,第 24 个) SMB_CLK_MAIN LAD2 SMB_DATA_MAIN
电子信息产品污染控制标示 依据中国发布的「电子信息产品污染控制管理办法」及 SJ/T 11364-2006「电子 信息产品污染控制标示要求」,电子信息产品应进行标示,藉以向消费者揭露 产品中含有的有毒有害物质或元素不致发生外泄或突变从而对环境造成污染或 对人身、财产造成严重损害的期限。依上述规定,您可于本产品之印刷电路板 上看见图一之标示。图一中之数字为产品之环保使用期限。由此可知此主板之 环保使用期限为 10 年。 �简体中文 图一 有毒有害物质或元素的名称及含量说明 若您欲了解此产品的有毒有害物质或元素的名称及含量说明,请参照以下表格 及说明。 部件名称 有害物质或元素 铅 (Pb) 镉 (Cd) 汞 (Hg) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 印刷电路板 及电子组件 X O O O O O 外部信号连 接头及线材 X O O O O O O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定 的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 1
Fatal1ty B250M Performance Series 1 簡介 感謝您購買華擎 Fatal1ty B250M Performance Series 主機板,本主機板經華擎嚴 格品管製作,是一套讓人信賴的可靠產品。本產品採耐用設計所展現的優異效 能,完全符合華擎對品質及耐用度的承諾。 繁體中文 由於主機板規格及 BIOS 軟體可能會更新,所以本文件內容如有變更,恕不另 行通知。如本文件有任何修改,可至華擎網站逕行取得更新版本,不另外通知。 若您需要與本主機板相關的技術支援,請上我們的網站瞭解有關您使用機型的 特定資訊。您也可以在華擎網站找到最新的 VGA 卡及 CPU 支援清單。華擎網 站 http://www.asrock.com。 1.
1.2 規格 平台 • Micro ATX 尺寸 CPU • 支援第 7 代與第 6 代 Intel® CoreTM i7/i5/i3/Pentium®/Celeron® 處理器(插座 1151) • Digi Power design 繁體中文 • 6 電源相位設計 • 支援 Intel® Turbo Boost 2.0 技術 晶片組 138 • Intel® B250 記憶體 • 雙通道 DDR4 記憶體技術 • 4 x DDR4 DIMM 插槽 • 支援 DDR4 2400/2133 非 ECC、無緩衝記憶體 * * 第 7 代 Intel® CPU 支援最高 2400 DDR4;第 6 代 Intel® CPU 支援最高 2133 DDR4。 • 支援 ECC UDIMM 記憶體模組 ( 於非 ECC 模式下運作 ) • 最大系統記憶體容量: 64GB • 支援 Intel® Extreme Memory Profile (XMP) 2.0 • 15μ 特厚鍍金插槽 擴充插槽 • 2 x PCI Express 3.
顯示卡 • 僅限整合 GPU 的處理器才可支援 Intel® HD Graphics Built-in Visuals 及 VGA 輸出。 • 支援 Intel® HD Graphics Built-in Visuals: 轉換 AVC、 MVC (S3D) 及 MPEG-2 Full HW Encode1 的 Intel® 高速影 像同步轉檔技術、Intel® InTruTM 3D, Intel® Clear Video HD Technology、Intel® InsiderTM、Intel® HD Graphics • Gen9 LP、DX11.
後面板 I/O • • • • • • • 繁體中文 • • • • 140 1 x PS/2 滑鼠連接埠 1 x PS/2 鍵盤連接埠 1 x D-Sub 連接埠 1 x DVI-D 連接埠 1 x HDMI 連接埠 1 x USB 2.0 連接埠(支援靜電保護(華擎全防護)) 1 x Fatal1ty 滑鼠連接埠 (USB 2.0)(支援靜電保護(華擎全 防護)) 3 x USB 3.0 Type-A 連接埠(支援靜電保護(華擎全防護)) 1 x USB 3.0 Type-C 連接埠(支援靜電保護(華擎全防護)) 1 x RJ-45 LAN 連接埠,含 LED(ACT/LINK LED 及 SPEED LED) HD 音訊插孔: 線路輸入/前置喇叭/麥克風 儲存裝置 • 6 x SATA3 6.0 Gb/s 接頭支援 NCQ、AHCI 及熱插拔 * * 若 M2_1 為 SATA 類型的 M.2 裝置佔用,將會停用 SATA3_0。 • 1 x Ultra M.2 插座 (M2_1),支援 2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s 模組與 M.
Fatal1ty B250M Performance Series • 2 x USB 2.0 排針(支援 4 個 USB 2.0 連接埠)(支援靜電 保護 ( 華擎全防護 )) • 1 x USB 3.0 排針(支援 2 個 USB 3.0 連接埠)(支援靜電 保護(華擎全防護)) • • • • 硬體監視器 • CPU /機殼溫度感應 • CPU /機殼風扇轉速計 • CPU /機殼靜音風扇(依 CPU 溫度自動調整機殼風扇速 度) • CPU /機殼風扇多重速度控制 • 機殼開啟偵測 • 電壓監控: +12V、+5V、+3.3V、CPU Vcore、DRAM、 PCH 1.0V 作業系統 認證 AMI UEFI Legal BIOS 含多語 GUI 支援 ACPI 6.0 符合喚醒自動開機 支援 SMBIOS 2.7 CPU、GT_CPU、DRAM、PCH 1.
請務必理解,超頻可能產生某種程度的風險,其中包括調整 BIOS 中的設定、 採用自由超頻技術或使用協力廠商的超頻工具。超頻可能會影響您系統的穩定 性,或者甚至會對您系統的元件及裝置造成傷害。您應自行負擔超頻風險及成 本。我們對於因超頻所造成的可能損害概不負責。 繁體中文 142
Fatal1ty B250M Performance Series 1.
機殼防護排針 (7-pin SPK_CI1) (請參閱第 1 頁,編號 18) SPEAKER DUMMY DUMMY +5V 機殼防護排針連接 至此排針。 1 USB 2.0 排針 USB_PWR PP+ (9-pin USB3_4) (請參閱第 1 頁,編號 21) (9-pin USB5_6) (請參閱第 1 頁,編號 20) USB 3.0 排針 (19-pin USB3_5_6) (請參閱第 1 頁,編號 9) SATA3_5 SATA3_3 SATA3_4 SATA3_2 繁體中文 Serial ATA3 接頭 (SATA3_0: 請參閱第 1 頁,編號 10) (SATA3_1: 請參閱第 1 頁,編號 11) (SATA3_2: 請參閱第 1 頁,編號 13) (SATA3_3: 請參閱第 1 頁,編號 14) (SATA3_4: 請參閱第 1 頁,編號 16) (SATA3_5: 請參閱第 1 頁,編號 15) SATA3_1 SATA3_0 SIGNAL GND DUMMY 1 本主機板上含有兩 GND DUMMY 組排針。各 USB 2.
Fatal1ty B250M Performance Series 前面板音訊排針 (9-pin HD_AUDIO1) (請參閱第 1 頁,編號 25) 本排針適用於連接 音訊裝置至前面板 音訊。 GND PRESENCE# MIC_RET OUT_RET 1 繁體中文 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 111 高解析度音訊支援智慧型音效介面偵測 (Jack Sensing),但機殼上的面板線必 須支援 HDA 才能正確運作。請依本手冊及機殼手冊說明安裝系統。 222 若您使用 AC’97 音訊面板,請按照以下步驟安裝至前面板音訊排針: A. 將 Mic_IN (MIC) 連接至 MIC2_L。 B. 將 Audio_R (RIN) 連接至 OUT2_R 且將 Audio_L (LIN) 連接至 OUT2_L。 C. 將接地 (GND) 連接至接地 (GND)。 D. MIC_RET 及 OUT_RET 僅供 HD 音訊面板使用。您不需要在 AC’97 音訊 面板上連接。 E.
ATX 電源接頭 (24-pin ATXPWR1) 12 本主機板配備一組 24-pin ATX 電源接 24 (請參閱第 1 頁,編號 8) 1 5 4 1 本主機板配備一組 8-pin ATX 12V 電 源接頭。若要使用 4-pin ATX 電源供 應器,請插入 Pin 1 及 Pin 5。 P CICL K LAD3 P CIRST # LAD0 FRAM E 此接頭支援信賴平台模組 (TPM) 系統,可確保儲存 金鑰、數位憑證、密碼及 資料的安全。TPM 系統 也能強化網路安全、保護 數位身分並確定平台完整 性。 +3 V TPM 標頭 (17-pin TPMS1) (請參閱第 1 頁,編號 22) GN D 此 COM1 排針支援 序列連接埠模組。 +3VS B 序列連接埠排針 (9-pin COM1) (請參閱第 1 頁,編號 24) AFD# ERROR# PINIT# SLIN# SMB_CLK_MAIN SMB_DATA_MAIN GN D LAD1 LAD2 GND SERIRQ # 1 GN D 列印連接埠標頭 (25-p
AURA RGB LED 排針 (4-pin RGB_HEADER1) AURA RGB LED 排 針用於連接 RGB (請參閱第 1 頁,編號 7) LED 延長線,可 供使用者選擇各種 LED 照明效果。 繁體中文 Fatal1ty B250M Performance Series 147
Spesifikasi Bahasa Indonesia Platform • Bentuk dan Ukuran Micro ATX CPU TM • Mendukung Prosesor Intel® Core i7/i5/i3/Pentium®/Celeron® (Soket 1151) Generasi ke-7 dan ke-6 • Digi Power design • Desain 6 Fase Daya • Mendukung Teknologi Intel® Turbo Boost 2.
Fatal1ty B250M Performance Series • Encode/Decode HWA: VP8, HEVC 8b; Encode/Decode GPU/ SW: VP9, HEVC 10b, (untuk CPU Intel® Generasi ke-6 ) Audio LAN Bahasa Indonesia • Memori bersama maksimum 1.024MB * Ukuran memori bersama maksimum bervariasi di berbagai sistem operasi.
Panel I/O Belakang Bahasa Indonesia 150 • 1 x Port Mouse PS/2 • 1 x Port Keyboard PS/2 • 1 x Port D-Sub • 1 x Port DVI-D • 1 x Port HDMI • 1 x Port USB 2.0 (Mendukung Perlindungan ESD (ASRock Full Spike Protection)) • 1 x Port Mouse Fatal1ty (USB 2.0) (Mendukung Perlindungan ESD (ASRock Full Spike Protection)) • 3 x Port USB 3.0 Tipe A (Mendukung Perlindungan ESD (Perlindungan ASRock Full Spike)) • 1 x Port USB 3.
Fatal1ty B250M Performance Series • • • • 1 x Konektor Daya ATX 24 pin 1 x Konektor Daya 8 pin 12V Fitur BIOS • • • • AMI UEFI Legal BIOS dengan dukungan GUI multibahasa ACPI 6.0 Kompatibel dengan aktivitas pengaktifan Dukungan SMBIOS 2.
Bahasa Indonesia Perlu diketahui, overclocking memiliki risiko tertentu, termasuk menyesuaikan pengaturan pada BIOS, menerapkan Teknologi Untied Overclocking, atau menggunakan alat overclocking pihak ketiga. Overclocking dapat mempengaruhi stabilitas sistem, atau bahkan dapat mengakibatkan kerusakan komponen dan perangkat sistem. Risiko dan biaya apapun menjadi tanggungan Anda. Kami tidak bertanggung jawab atas kemungkinan kerusakan karena overclocking.
Fatal1ty B250M Performance Series Enabling USB Ports for Windows® 7 Installation Intel® new processors have removed their support for the Enhanced Host Controller Interface (EHCI – USB2.0) and only kept the eXtensible Host Controller Interface (XHCI – USB3.0). Due to that fact that XHCI is not included in the Windows 7 inbox drivers, users may find it difficult to install Windows 7 operating system because the USB ports on their motherboard won’t work.
Instructions Step 1 Insert the Windows® 7 installation disk or USB drive to your system. Step 2 Extract the tool (Win7 USB Patcher) and launch it. Step 3 Select how you want to install Windows 7 later. Step 4 Locate your Win7 source folder or your ISO file.
Fatal1ty B250M Performance Series Step 5 Select the USB storage, compact disk or destination folder for the new Windows 7 installation file. Step 6 Click “Start” to begin. Step 7 English Now you are able to install Windows® 7 on Intel® new processors with the new burned CD. Or please use the patched ISO image to make an OS USB drive to install the OS.
Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at http://www.asrock.com/support/tsd.asp ASRock Incorporation 2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.) ASRock EUROPE B.V.
EC-Declaration of Conformity For the following equipment: Motherboard (Product Name) Fatal1ty B250M Performance Series / ASRock (Model Designation / Trade Name) ASRock Incorporation (Manufacturer Name) 2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District, Taipei City 112, Taiwan (R.O.C.