User manual

English
36
FM2A58M+ BTC
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust
the value of Processor Frequency and Processor Voltage. However, it is
recommended to keep the default value for system stability.
CPU Load-line Calibration
CPU Load-line Calibration helps prevent APU voltage droop when the
system is under heavy load.
NB Load-line Calibration
NB Load-line Calibration helps prevent NB voltage droop when the
system is under heavy load.
GFX Engine Clock
Use this to adjust GFX Engine Clock. The default value is [Auto].
SMU Voltage Control
Use this to control the SMU (System Management Unit) voltage.
NB Load-line Trim
Use this to adjust the NB Load-line.
CORE Load-line Trim
Use this to adjust the CORE Load-line.
DRAM Timing Conguration
Load XMP Setting
Load XMP settings to overclock the DDR3 memory and perform beyond
standard
specications.
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s)
inserted and assigns appropriate frequency automatically.