User Manual
Table Of Contents
- Chapter 1 Introduction
- 1.1 Package Contents
- Chapter 2 Installation
- 2.1 Installing the CPU
- 2.2 Installing the CPU Fan and Heatsink
- 2.3 Installing Memory Modules (DIMM)
- 2.4 Expansion Slots (PCI Express Slots)
- 2.5 Jumpers Setup
- 2.6 Onboard Headers and Connectors
- 2.7 CrossFireXTM and Quad CrossFireXTM Operation Guide
- 2.8 M.2 WiFi/BT Module and Intel® CNVi (Integrated WiFi/BT) Installation Guide
- Chapter 3 Software and Utilities Operation
- Chapter 4 UEFI SETUP UTILITY
- 4.1 Introduction
- 4.2 EZ Mode
- 4.3 Advanced Mode
- 4.4 Main Screen
- 4.5 OC Tweaker Screen
- 4.6 Advanced Screen
- 4.6.1 CPU Configuration
- 4.6.2 Chipset Configuration
- 4.6.3 Storage Configuration
- 4.6.4 Intel® Thunderbolt
- 4.6.5 Super IO Configuration
- 4.6.6 ACPI Configuration
- 4.6.7 USB Configuration
- 4.6.8 Trusted Computing
- 4.7 Tools
- 4.8 Hardware Health Event Monitoring Screen
- 4.9 Security Screen
- 4.10 Boot Screen
- 4.11 Exit Screen
English
58
IO-L Init Value
Congure IO latency init value for IO latency training.
RTL (CH A)
Congure round trip latency for channel A.
RTL (CH B)
Congure round trip latency for channel B.
IO-L (CH A)
Congure IO latency for channel A.
IO-L (CH B)
Congure IO latency for channel B.
IO-L Oset (CH A)
Congure IO latency oset for channel A.
IO-L Oset (CH B)
Congure IO latency oset for channel B.
RFR Delay (CH A)
Congure RFR Delay for Channel A.
RFR Delay (CH B)
Congure RFR Delay for Channel B.
ODT Setting
ODT WR (A1)
Congure the memory on die termination resistors' WR for channel A1.
ODT WR (A2)
Congure the memory on die termination resistors' WR for channel A2.
ODT WR (B1)
Congure the memory on die termination resistors' WR for channel B1.
ODT WR (B2)
Congure the memory on die termination resistors' WR for channel B2.