User Manual
Table Of Contents
- Chapter 1 Introduction
- 1.1 Package Contents
- Chapter 2 Installation
- 2.1 Installing the CPU
- 2.2 Installing the CPU Fan and Heatsink
- 2.3 Installing Memory Modules (DIMM)
- 2.4 Expansion Slots (PCI Express Slots)
- 2.5 Jumpers Setup
- 2.6 Onboard Headers and Connectors
- 2.7 CrossFireXTM and Quad CrossFireXTM Operation Guide
- 2.8 M.2 WiFi/BT Module and Intel® CNVi (Integrated WiFi/BT) Installation Guide
- Chapter 3 Software and Utilities Operation
- Chapter 4 UEFI SETUP UTILITY
- 4.1 Introduction
- 4.2 EZ Mode
- 4.3 Advanced Mode
- 4.4 Main Screen
- 4.5 OC Tweaker Screen
- 4.6 Advanced Screen
- 4.6.1 CPU Configuration
- 4.6.2 Chipset Configuration
- 4.6.3 Storage Configuration
- 4.6.4 Intel® Thunderbolt
- 4.6.5 Super IO Configuration
- 4.6.6 ACPI Configuration
- 4.6.7 USB Configuration
- 4.6.8 Trusted Computing
- 4.7 Tools
- 4.8 Hardware Health Event Monitoring Screen
- 4.9 Security Screen
- 4.10 Boot Screen
- 4.11 Exit Screen
English
78
4.8 Hardware Health Event Monitoring Screen
is section allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, fan
speed and voltage.
Fan Tuning
Measure Fan Min Duty Cycle.
Fan-Tastic Tuning
Select a fan mode for CPU Fans 1&2, or choose Customize to set 5 CPU
temperatures and assign a respective fan speed for each temperature.
CPU Fan 1 Setting
Select a fan mode for CPU Fans 1, or choose Customize to set 5 CPU temperatures and
assign a respective fan speed for each temperature.
CPU Fan Step Up
Set the value of CPU Fan Step Up.
CPU Fan Step Down
Set the value of CPU Fan Step Down.
CPU_FAN2 / W
_
Pump Switch
Select CPU or Water Pump mode.