User manual

4242

2.132.13

2.13

Serial ASerial A

Serial A

A (SAA (SA

A (SA

A) / Serial AA) / Serial A

A) / Serial A

AII (SAAII (SA

AII (SA

AII) Hard DisksAII) Hard Disks

AII) Hard Disks

InstallationInstallation

Installation

This motherboard adopts NVIDIA

GeForce 8200 chipset that supports Serial ATA

(SATA) / Serial ATAII (SATAII) hard disks and RAID functions. You may install SATA /

SATAII hard disks on this motherboard for internal storage devices. This section will

guide you to install the SATA / SATAII hard disks.

STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.

STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.

STEP 3: Connect one end of the SATA data cable to the motherboard’s SATAII

connector.

STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard

disk.

1. If you plan to use RAID 0, RAID 1 or JBOD function, you need to install at

least 2 SATA / SATAII hard disks. If you plan to use RAID 5 function, you

need to install 3 SATA / SATAII hard disks. If you plan to use RAID 0+1

function, you need to install 4 SATA / SATAII hard disks.

2. For K10N78-1394, it is recommended to build RAID on internal SATAII

ports. In other words, if SATAII_6 (PORT5) is used for eSATAII port,

please build RAID on other SATAII ports.

3. Under IDE mode, SATAII_5 (PORT4) and SATAII_6 (PORT5) cannot

function.