User manual

3434

2.122.12

2.12

Serial ASerial A

Serial A

A (SAA (SA

A (SA

A) / Serial AA) / Serial A

A) / Serial A

AII (SAAII (SA

AII (SA

AII) Hard DisksAII) Hard Disks

AII) Hard Disks

InstallationInstallation

Installation

P45TS-R adopts Intel

ICH10R south bridge chipset that supports Serial ATA

(SATA) / Serial ATAII (SATAII) hard disks and RAID (RAID 0, RAID 1, RAID 10, RAID

5, and Intel Matrix Storage) functions. P45TS adopts Intel

ICH10 south bridge

chipset that supports Serial ATA (SATA) / Serial ATAII (SATAII) hard disks. You may

install SATA / SATAII hard disks on this motherboard for internal storage devices.

This section will guide you to install the SATA / SATAII hard disks.

STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.

STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.

STEP 3: Connect one end of the SATA data cable to the motherboard’s SATAII

connector.

STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard

disk.

1. If you plan to use RAID 0, RAID 1, RAID 10 or Intel Matrix Storage

function, you need to install at least 2 SATA / SATAII hard disks. If you

plan to use RAID 5 function, you need to install at least 3 SATA / SATAII

hard disks.

2. It is not recommended to switch the “Configure SATAII as” setting after

OS installation.