User manual

6464
6464
64
BIOS SETUP UTILITY
Storage Configuration
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
SATAII Operation Mode
SATAII_1
SATAII_2
SATAII_3
SATAII_4
SATAII_5
SATAII_6
eSATAII
IDE1 Master
IDE1 Slave
[IDE]
[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
SATAII 1,2,3,4 Configuration
SATAII 5,6 Configuration
[Compatible]
[Enhanced]
[Enabled]
[IDE]
[Enabled]
IDE
RAID
AHCI
Disabled
Options
Onboard eSATAII
eSATAII Operation Mode
Onboard IDE and 1394
3.4.43.4.4
3.4.43.4.4
3.4.4
Storage ConfigurationStorage Configuration
Storage ConfigurationStorage Configuration
Storage Configuration
SATAII Operation Mode
Use this to select SATAII Operation Mode. Configuration options: [IDE],
[RAID], [AHCI] and [Disabled]. The default value is [IDE].
If you select [IDE] mode, the options “SATAII 1,2,3,4 Configuration” and
“SATAII 5,6 Configuration” will appear.
If you select [RAID] or [AHCI] mode, the options “Hot Plug” and “Link Power
Management” will appear.
AHCI (Advanced Host Controller Interface) supports NCQ and other
new features that will improve SATA disk performance but IDE
mode does not have these advantages.
Onboard eSATAII
Use this item to enable or disable onboard eSATAII. The default value is
[Enabled]. If you enable this item, the option “eSATAII Operaion Mode” will
appear.
Onboard IDE and 1394
Use this item to enable or disable onboard IDE and 1394. The default
value is [Enabled].
ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows
®
Vista
TM
certification.