User manual

ManualsBrandsASROCK ManualsMotherboardsPV530-ITX

2323

BIOS SETUP UTILITY

Main

Advanced H/W Monitor Boot Security Exit

Select the over clock

mode.

Select Screen

Select Item

Enter Go to Sub Screen

F1 General Help

F9 Load Defaults

F10 Save and Exit

ESC Exit

OC Tweaker

OC Tweaker Settings

CPU Frequency (MHz)

Overclock Mode

[200]

[Auto]

Boot Failure Guard

Spread Spectrum

Boot Failure Guard Count

[Enabled]

[3]

[Auto]

VCORE Voltage

VCCM(DRAM) Voltage

Chipset Voltage

VTT Voltage

[Auto]

CPU Ratio Setting

DRAM Frequency

[9]

[Auto]

DRAM Configuration

3.33.3

3.3

OC TOC T

OC T

weakweak

weak

er Screener Screen

er Screen

In the OC Tweaker screen, you can set up overclocking features.

Overclock Mode

Use this to select Overclock Mode. The default value is [Auto]. Configura-

tion options: [Auto], [Manual] and [Optimized].

CPU Frequency (MHz)

Use this option to adjust CPU frequency.

Boot Failure Guard

Enable or disable the feature of Boot Failure Guard.

Boot Failure Guard Count

Enable or disable the feature of Boot Failure Guard Count.

Spread Spectrum

This item should always be [Auto] for better system stability.

CPU Ratio Setting

You may use this item to set the ratio between CPU core clock and the FSB

frequency.

DRAM Frequency

If [Auto] is selected, the motherboard will detect the memory module(s)

inserted and assigns appropriate frequency automatically. You may select

[Auto], [400MHz DDR3_800] or [533MHz DDR3_1066].