Specifications

16 17
English
2.5 Installation of Memory Modules (DIMM)
Supported DIMM type: ECC Unbuered DIMM
is motherboard provides eight 240-pin DDR3 (Double Data Rate 3) DIMM slots, and
supports Dual Channel Memory Technology.
If you want to install one memory module, you can install it in any one of the DIMM slots.
If you want to install two or four memory modules, please refer to the table below for
recommended conguration.
DDR3_A1 (64 bit, 240-pin module, Blue)
DDR3_A2 (64 bit, 240-pin module, White)
DDR3_B1 (64 bit, 240-pin module, Blue)
DDR3_B2 (64 bit, 240-pin module, White)
Dual Channel Memory Conguration
Priority DDR3_A1 DDR3_A2 DDR3_B1 DDR3_B2
1 Populated Populated
2 Populated Populated
3 Populated Populated Populated Populated
1. For dual channel conguration, you always need to install identical (the same brand,
speed, size and chip-type) DDR3 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one or three memory
module installed.
3. It is not allowed to install a DDR or DDR2 memory module into a DDR3 slot; otherwise,
this motherboard and DIMM may be damaged.
e DIMM only ts in one correct orientation. It will cause permanent damage to the
motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.