User Manual
Table Of Contents
- Chapter 1 Introduction
- 1.1 Package Contents
- Chapter 2 Installation
- 2.1 Installing the CPU
- 2.2 Installing the CPU Liquid Cooler
- 2.3 Installation of Memory Modules (DIMM)
- 2.4 Expansion Slots (PCI Express Slots)
- 2.5 Onboard Headers and Connectors
- 2.6 Smart Switches
- 2.7 Dr. Debug
- 2.8 SLITM and Quad SLITM Operation Guide
- 2.9 CrossFireXTM and Quad CrossFireXTM Operation Guide
- 2.10 M.2_SSD (NGFF) Module Installation Guide (M2_1)
- 2.11 M.2_SSD (NGFF) Module Installation Guide (M2_2)
- 2.12 M.2_SSD (NGFF) Module Installation Guide (M2_3)
- Chapter 3 Software and Utilities Operation
- Chapter 4 UEFI SETUP UTILITY
English
20
2.3 Installation of Memory Modules (DIMM)
is motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots,
and supports Quad Channel Memory Technology.
Memory Conguration
Option 1 2 3
DDR4_D1
Populated Populated
DDR4_C1
Populated Populated
DDR4_A1
Populated Populated
DDR4_B1
Populated Populated
•
If only two memory modules are installed in the DDR4 DIMM slots, you can either
install the memory modules on DDR4_A1, DDR4_B1 or DDR4_C1, DDR4_D1.
e DIMM only ts in one correct orientation. It will cause permanent damage to
the motherboard and the DIMM if you force the DIMM into the slot at incorrect
orientation.
1. For dual channel conguration, you always need to install identical (the same
brand, speed, size and chip-type) DDR4 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one or three
memory module installed.
3. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4
slot; otherwise, this motherboard and DIMM may be damaged.