User Manual
Table Of Contents
- Chapter 1 Introduction
- 1.1 Package Contents
- Chapter 2 Installation
- 2.1 Installing the CPU
- 2.2 Installing the CPU Liquid Cooler
- 2.3 Installation of Memory Modules (DIMM)
- 2.4 Expansion Slots (PCI Express Slots)
- 2.5 Onboard Headers and Connectors
- 2.6 Smart Switches
- 2.7 Dr. Debug
- 2.8 SLITM and Quad SLITM Operation Guide
- 2.9 CrossFireXTM and Quad CrossFireXTM Operation Guide
- 2.10 M.2_SSD (NGFF) Module Installation Guide (M2_1)
- 2.11 M.2_SSD (NGFF) Module Installation Guide (M2_2)
- 2.12 M.2_SSD (NGFF) Module Installation Guide (M2_3)
- Chapter 3 Software and Utilities Operation
- Chapter 4 UEFI SETUP UTILITY
English
60
Chapter 4 UEFI SETUP UTILITY
4.1 Introduction
is section explains how to use the UEFI SETUP UTILITY to congure your
system. You may run the UEFI SETUP UTILITY by pressing <F2> or <Del> right
aer you power on the computer, otherwise, the Power-On-Self-Test (POST) will
continue with its test routines. If you wish to enter the UEFI SETUP UTILITY aer
POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or by pressing the
reset button on the system chassis. You may also restart by turning the system o
and then back on.
Because the UEFI soware is constantly being updated, the following UEFI setup
screens and descriptions are for reference purpose only, and they may not exactly
match what you see on your screen.