User Manual
Table Of Contents
- Chapter 1 Introduction
- 1.1 Package Contents
- Chapter 2 Installation
- 2.1 Installing the CPU
- 2.2 Installing the CPU Liquid Cooler
- 2.3 Installation of Memory Modules (DIMM)
- 2.4 Expansion Slots (PCI Express Slots)
- 2.5 Onboard Headers and Connectors
- 2.6 Smart Switches
- 2.7 Dr. Debug
- 2.8 SLITM and Quad SLITM Operation Guide
- 2.9 CrossFireXTM and Quad CrossFireXTM Operation Guide
- 2.10 M.2_SSD (NGFF) Module Installation Guide (M2_1)
- 2.11 M.2_SSD (NGFF) Module Installation Guide (M2_2)
- 2.12 M.2_SSD (NGFF) Module Installation Guide (M2_3)
- Chapter 3 Software and Utilities Operation
- Chapter 4 UEFI SETUP UTILITY
English
87
X399M Taichi
4.8 Hardware Health Event Monitoring Screen
is section allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, fan
speed and voltage.
Fan Tuning
Measure Fan Min Duty Cycle.
Fan-Tastic Tuning
Select a fan mode for CPU Fans 1&2, or choose Customize to set 5 CPU temperatures and
assign a respective fan speed for each temperature.
CPU Fan 1 Setting
Select a fan mode for CPU Fan 1, or choose Customize to set 5 CPU temperatures
and assign a respective fan speed for each temperature.
CPU Fan 1 Temp Source
Select a fan temperature source for CPU Fan 1.
CPU_OPT / W_Pump Switch
Select CPU Optional or Water Pump mode.