User manual

ManualsBrandsASROCK ManualsMotherboardsX58 Deluxe Socket 1366 ATX Motherboard Intel X58 6xDDR3 3xPCI/4xPCIe2-X16 6xSATA-2 RAID

4949

STEP 1: Set Up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.

B. Set “SATAII Configuration” to [Enhanced], and then in the option “Configure

SATAII as”, please set the option to [AHCI].

STEP 2: Make a SATA / SATAII driver diskette.

Please make a SATA / SATAII driver diskette by following section 2.18.1 step 2 on

page 45.

STEP 3: Install Windows

XP / XP 64-bit OS on your system.

After making a SATA / SATAII driver diskette, you can start to install Windows

XP / XP

64-bit on your system. At the beginning of Windows

setup, press F6 to install a third-

party AHCI driver. When prompted, insert the SATA / SATAII driver diskette containing

the Intel

AHCI driver. After reading the floppy disk, the driver will be presented. Select

the driver to install according to the mode you choose and the OS you install. You may

select: "Intel(R) ICH10R SATA AHCI Controller (Desktop - Windows XP)" for Windows

XP or "Intel(R) ICH10R SATA AHCI Controller (Desktop - Windows XP64)" for Windows

XP 64-bit.

2.192.19

2.19

Installing WindowsInstalling Windows

Installing Windows

XP / XP 64-bit / Vista XP / XP 64-bit / Vista

XP / XP 64-bit / Vista

TM TM

/ Vista/ Vista

/ Vista

TMTM

64-bit W64-bit W

64-bit W

ithout RAID Fithout RAID F

ithout RAID F

unctionsunctions

unctions

If you want to install Windows

XP / XP 64-bit / Vista

/ Vista

64-bit OS on your

SATA / SATAII HDDs without RAID functions, please follow below procedures

according to the OS you install.

2.19.1 Installing Windows2.19.1 Installing Windows

2.19.1 Installing Windows

XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID

XP / XP 64-bit Without RAID

F F

unctionsunctions

unctions

If you want to install Windows

XP / XP 64-bit OS on your SATA / SATAII HDDs

without RAID functions, please follow below steps.

Using SATA / SATAII HDDs and eSATAII devices with NCQ function

STEP 1: Set up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.

B. Set “SATAII Configuration” to [Enhanced], and then in the option “Configure

SATAII as”, please set the option to [IDE].

STEP 2: Install Windows

XP / XP 64-bit OS on your system.

Using SATA / SATAII HDDs and eSATAII devices without NCQ function