User Guide

2.4.2 Conguring a PCIE SSD RAID Array Using UEFI

Setup Utility

Caution:

PleaseuseidenticalPCIESSDsthatarethesametypeand

volume.

STEP 1:

EntertheUEFISetupUtilitybypressing<F2>or<Del>right

afteryoupoweronthecomputer.

STEP 2:

Go to Advanced Storage Conguration and set SATA

Mode Selection to [RAID] and set Launch Storage OpROM

policyto[UEFIonly],thenadjusttheM.2slotsthatyou’ve

installedPCIESSDsto[Enabled].Press<F10>tosavethe

congurationchangesandexitsetup.