User Manual
Table Of Contents
- Chapter 1 Introduction
- 1.1 Package Contents
- Chapter 2 Installation
- 2.1 Installing the CPU
- 2.2 Installing the CPU Fan and Heatsink
- 2.3 Installing Memory Modules (DIMM)
- 2.4 Expansion Slots (PCI and PCI Express Slots)
- 2.5 Jumpers Setup
- 2.6 Onboard Headers and Connectors
- 2.7 CrossFireXTM and Quad CrossFireXTM Operation Guide
- 2.7.1 Installing Two CrossFireXTM-Ready Graphics Cards
- 2.7.2 Driver Installation and Setup
- 2.8 M.2_SSD (NGFF) Module Installation Guide
- Chapter 3 Software and Utilities Operation
61
English
Z390 Pro4
IOL (CH B)
Congure IO latency for channel B.
IOL Oset (CH A)
Congure IO latency oset for channel A.
IOL Oset (CH B)
Congure IO latency oset for channel B.
RFR Delay (CH A)
Congure RFR Delay for Channel A.
RFR Delay (CH B)
Congure RFR Delay for Channel B.
ODT Setting
ODT WR (A1)
Congure the memory on die termination resistors' WR.
ODT WR (A2)
Congure the memory on die termination resistors' WR.
ODT WR (B1)
Congure the memory on die termination resistors' WR.
ODT WR (B2)
Congure the memory on die termination resistors' WR.
ODT NOM (A1)
Use this to change ODT Auto/Manual settings. e default is [Auto].
ODT NOM (A2)
Use this to change ODT Auto/Manual settings. e default is [Auto].
ODT NOM (B1)
Use this to change ODT Auto/Manual settings. e default is [Auto].
ODT NOM (B2)
Use this to change ODT Auto/Manual settings. e default is [Auto].