User's Manual

12
ASSA ABLOY Hospitality
66 1001 001-7
To add an encoder device in the Visionline device list:
Figure 6
1. When the USBXpress driver
has been installed according to
Appendix B, open the Visionline
device list by double clicking on
Devices under the Lists tab in
the navigation window.
2. In the Devices dialog, click Add;
the Device details dialog will
be shown.
3. Enter a Name for the encoder.
4. If desired, enter a Description
for the encoder.
5. At Type, choose 'Network
RFID encoder (USB)' in the
drop-down-menu.
Figure 7
6. At S/N, click the button. All
network RFID encoders that are
connected via USB will be shown
in the drop-down list; see Figure 7.
7. In the Device details dialog, mark
the applicable radio button under
Location. For Server and
Computer, the field PMS
address will be available;
fill in this if applicable.
8. Click Save and Close.
Figure 8
9. Double click on
RFIDEncoderConfig.exe which
is available on the Visionline CD
under Drivers/RFID Encoder/
RFID Encoder Configuration
Utility; if the encoder is correctly
connected to the PC and uses the
USBXpress driver, the serial number
of the encoder should be shown in
the upper left window at USB; see
example in Figure 8.
10.Follow the steps in section 5.1 to
make the settings in RFID Encoder
Configuration Utility.